- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
positive crankcase valve is located on the back of the valve cover on the right valve cover i believe if your looking at the engine, you will need to remove some hoses to be able to access the pcv valve, here is a diagram to help
The EGR pressure sensor is located within inches of the EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts.
if your obd2 scanner fits the connection you have obd2, obd1 connector is way differnt.
your code p1443 Control System Canister Purge Valve (Mechanical) Malfunction Monitors the fuel vapor flow between the engine intake manifold and the EVAP canister. The system failure occurs when a leak or blockage between the intake manifold, the EVAP canister purge valve and the EVAP canister is detected by the PCM. l Pinched, blocked or plugged fuel vapor tubes/hoses (except between fuel tank and EVAP canister) l Damaged EVAP canister l Disconnected, cracked or cut fuel vapor tubes/hoses (except between fuel tank and EVAP canister) l Damaged EVAP canister purge valve Check for audible vacuum noise in the engine compartment or significant fuel odor in the engine compartment or near the EVAP canister.
This link has all the codes you need. http://rockledge.home.comcast.net/~rockledge/RangerPictureGallery/DTCs.pdf
×