Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Lock light on dash got a citreon m/c he was scratching his head he said the ecu is not taking to bsi so i needed to get a second hand matching kit done this but light is still on and still wont start

Changed ecu ,bsi,ingnition and key

1 Answer

Randy Ohler

Cars & Trucks Master 14,585 Answers
Posted on Jul 30, 2016

Randy Ohler

Cars & Trucks Master

Joined: Jun 13, 2010

Answers

14585

Questions

Helped

3946880

Points

39683

Did you get all the parts out of one vehicle? If not. that's the problem. They need program to each other. If so, then you missed something that is needed for security. Here in the USA. Some cars is just the BCM and ECM, then relearn the key you have. Others you have to get the BCM,ECM,key, lock cylinder and the instrument panel to make it work. All this from one car and the car has to the same engine and transmission as yours.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

You need to have the ECU programmed to the key code. Dealership is the only way I know.

Read full answer

May 15, 2019 • Jeep Cars & Trucks

tip

I have a 2000 GC and the headlights were very yellow. I used a kit to clean them...

take rubbing compond apply on front lends rub with rag untill compond is dry they look like new

Read full tip

on Jan 14, 2009 • 2001 Chrysler Voyager

0helpful

1answer

I GOT 308 ITS SAYING ECU LOCKED WAT MIYT BE A PROBLEM

Peugeot ? dealer only sorry special software connected via internet .Have one in dealer at the moment iam afraid i cannot read anything ,citreon the same problems its known as a BSI unit they cost around 550 euros trade price and can only be programmed up by dealer ,windows ,engine ,roof, lights everything ..

Read full answer

Sep 03, 2018 • Cars & Trucks

0helpful

1answer

Peugeot 207 ECU locked.no communication with bsi and ecu

Has the Bsi got wet or is there any signs of dampness around it etc

Read full answer

Jun 20, 2017 • Peugeot Cars & Trucks

0helpful

1answer

I have a citreon c3 2008 the fog light in the bumper is smashed and needs to be replaced how do I doe this? i

hi .u try hand into the back fog light turn or open the cover .inside have a pin lock the for light bulb . release the lock pin disconnect the socket just replace it . if u no a technician ,bast bet send to service dealer.because maybe need dismantle front bumper . have a good day

Read full answer

Feb 09, 2015 • Cars & Trucks

1helpful

1answer

Peugeot 406 hdi 90 2003 problem bsi

have heating in my peugeot 406 hdi when car is ticking over but when i drive for few mins the heater goes cold

Read full answer

May 03, 2012 • 2005 Peugeot 405

3helpful

1answer

Daihatsu Sirion 2006 immobilizer install Hi , I have just installed a second hand matching ignition switch , transponder key, door controller module, and ECU immobilizer module from a Daihatsu wrecker .It...

hi
Need to do engine ECU Reset
do you know how to do that?

Read full answer

Mar 31, 2012 • 2006 Daihatsu Sirion 1.3

0helpful

1answer

Colt ecu change

The ECU would have to match the part number EXACTLY. You're much better off getting your current ECU rebuilt and programmed by the rebuilder.

Read full answer

Aug 26, 2017 • 2006 Mitsubishi Colt

0helpful

1answer

We replaced the damaged valves on a citreon dispatch 2008 engine. But after putting the engine back into the car. The car wouldn't fire up. The timing is fine. The battery was disconnected and the...

I have the same problem few days ago and found my solution on Fixya Expert Sources website. Here you will get all the top sources of your problem. All the sources of this site provided by top Fixya Gurus. Have a good look at the sources of the page. Go through thesources to find your solution. Hope it will help.

View Count:2

Read full answer

Sep 04, 2011 • Peugeot 505 Cars & Trucks

0helpful

1answer

2003 ford explorer is stuck in park, the brake lights are on so i dont think it is something to do with the brake

Printable View (109 KB) TSB
04-22-12

GEAR SELECTOR LEVER - INCREASED EFFORT TO SHIFT FROM DRIVE TO PARK

Publication Date: November 1, 2004
FORD: 2002-2005 Explorer, Mountaineer ISSUE: Some 2002-2005 Explorer 4dr/Mountaineer vehicles, may require a greater effort to move the gear selector lever (shift lever) from drive to park. This may be due to a time delay with the brake shift interlock (BSI) pin retraction.
ACTION: To service, replace the BSI switch. Refer to the following Service Procedure.
SERVICE PROCEDURE

Remove the two (2) fasteners supporting the instrument panel knee bolster from below the steering column and remove the cover (Figure 1).

Figure 1 - Article 04-22-12
Remove the three (3) fasteners supporting the steering column lower shroud and remove the cover (Figure 2).

Figure 2 - Article 04-22-12
Remove the three (3) wiring bundle carrier fasteners from the bottom of the steering column to allow movement while removing the BSI switch. It may be necessary to release the connectors from the multifunction switch (Figure 3).

Figure 3 - Article 04-22-12
Remove the BSI fasteners (T-30 on the side and T-20 on the bottom) (Figure 4).

Figure 4 - Article 04-22-12
Pull the BSI tab on the bottom of the column downward to help free the BSI from the column housing.
Break the two (2) side tabs off the BSI by the white wiring connector (Figure 5).

Figure 5 - Article 04-22-12
Push the locking tab on the white connector towards the wiring to release the connector from the BSI. Be careful not to damage the connector or wiring. If the connector does not free easily, a very small flat screwdriver may be used to help lift the locking tab (Figure 6).

Figure 6 - Article 04-22-12
Connect the wiring to the new BSI. Ensure all clips are fully engaged to prevent the connector from pulling free.
Reinstall the BSI onto the steering column and reinstall fasteners (Figure 7).

Figure 7 - Article 04-22-12
Check BSI function. With the key in the accessories or run position, press the brake pedal. The BSI pin should retract on brake application, and spring up one (1) second after releasing the brake pedal. Repeat several times.
Reinstall fasteners to connect wiring bundle carrier to the steering column. Make sure all connections to the multifunction switch unit are secured properly.
Reassemble steering column in reverse order. Ensure rubber gap hider around shift lever is properly seated on the shroud.
Cycle the shift lever from park to drive and drive back to park several times to verify improved shift effort.

PART NUMBER PART NAME 1L2Z-3Z719-DA BSI Switch

Read full answer

Feb 15, 2011 • Ford Explorer Cars & Trucks

Not finding what you are looking for?

View Most Popular

Cars & Trucks

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

Jeep Cars & Trucks

57 views

Ask a Question

Usually answered in minutes!

Related Topics:

Trustworthy Expert Solutions

Lock light on dash got a citreon m/c he was scratching his head he said the ecu is not taking to bsi so i needed to get a second hand matching kit done this but light is still on and still wont start

1 Answer

Randy Ohler

Add Your Answer

Attachments: Added items

Related Questions:

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

I have a 2000 GC and the headlights were very yellow. I used a kit to clean them...

I GOT 308 ITS SAYING ECU LOCKED WAT MIYT BE A PROBLEM

Peugeot 207 ECU locked.no communication with bsi and ecu

I have a citreon c3 2008 the fog light in the bumper is smashed and needs to be replaced how do I doe this? i

Peugeot 406 hdi 90 2003 problem bsi

Daihatsu Sirion 2006 immobilizer install Hi , I have just installed a second hand matching ignition switch , transponder key, door controller module, and ECU immobilizer module from a Daihatsu wrecker .It...

Colt ecu change

We replaced the damaged valves on a citreon dispatch 2008 engine. But after putting the engine back into the car. The car wouldn't fire up. The timing is fine. The battery was disconnected and the...

2003 ford explorer is stuck in park, the brake lights are on so i dont think it is something to do with the brake

Not finding what you are looking for?

Cars & Trucks

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

Ask a Question

Check Out the Latest Top Trucks Report!

Top Cars & Trucks Experts

ZJ Limited

john h

Arnie Burke

Are you a Car and Truck Expert? Answer questions, earn points and help others

Manuals & User Guides

DIS9_Full.pdf. user-manual-1994...

DIS9_Full.pdf. user-manual-1994...

Rhonda_Docs.pdf. user-manual-2001...

Related Topics:

Trustworthy Expert Solutions

Lock light on dash got a citreon m/c he was scratching his head he said the ecu is not taking to bsi so i needed to get a second hand matching kit done this but light is still on and still wont start

1 Answer

Randy Ohler

Add Your Answer

Attachments: Added items

Related Questions:

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

I have a 2000 GC and the headlights were very yellow. I used a kit to clean them...

I GOT 308 ITS SAYING ECU LOCKED WAT MIYT BE A PROBLEM

Peugeot 207 ECU locked.no communication with bsi and ecu

I have a citreon c3 2008 the fog light in the bumper is smashed and needs to be replaced how do I doe this? i

Peugeot 406 hdi 90 2003 problem bsi

Daihatsu Sirion 2006 immobilizer install Hi , I have just installed a second hand matching ignition switch , transponder key, door controller module, and ECU immobilizer module from a Daihatsu wrecker .It...

Colt ecu change

We replaced the damaged valves on a citreon dispatch 2008 engine. But after putting the engine back into the car. The car wouldn't fire up. The timing is fine. The battery was disconnected and the...

2003 ford explorer is stuck in park, the brake lights are on so i dont think it is something to do with the brake

Not finding what you are looking for?

Cars & Trucks

Changed ecu in 1999 jeep Cherokee how do i get my key to match the new vin runs for 3 seconds and stalls security code on dash can i override the code thank you Rob

Ask a Question

Popular Questions

Toyota dashboard CD player won't eject

4.3 Firing order diagram for 4.3L v6 Chevy engine

BMW X5 Trans Fail Safe Program,

Diagram of 1996 ford ranger fusebox which fuse is

What does my check engine light trouble code $7e8 mean?

Check Out the Latest Top Trucks Report!

Top Cars & Trucks Experts

ZJ Limited

john h

Arnie Burke

Are you a Car and Truck Expert? Answer questions, earn points and help others

Manuals & User Guides

DIS9_Full.pdf. user-manual-1994...

DIS9_Full.pdf. user-manual-1994...

Rhonda_Docs.pdf. user-manual-2001...