Question about 2010 Peugeot 308 1.4

Open Question

Engine light came on my peugeot 1.6 deisel reading engine repair problem

Engine management came on sayiny engine repair problem po code 2952

Posted by David ratcliffe on

Ad

5 Related Answers

Anonymous

  • 99 Answers

SOURCE: engine management light is on

The car will need to be put on a diagnosic machine to point out exactly why the engine has gone into limp mode, but if it is still running it could just be down to a sensor, Hope this helps

Posted on Dec 04, 2008

Ad

ash seder

  • 166 Answers

SOURCE: peugeot 406 hdi

very hard to diagnose these cars go to dealer and get checked it is the only way to fix these kind of issues

Posted on Dec 20, 2008

Ad

Anonymous

  • 89 Answers

SOURCE: Engine management light is on

u will have to get it on a computer to diagnos the problem as soon as possible

Posted on Jul 13, 2009

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: how can i reset the engine management light on

274bd1a.jpg


The following is from peugeotdiesel.com bot seems to be valid for all models:
1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read '0' and the service symbol will extinguish.

Also, can disconnect the battery for a few minutes. This should clear the code. Unless you have fixed the problem that set the code it will come on again.

I hope help you with this (remember rated this help) Good luck.

Posted on Oct 06, 2009

mike hayward

  • 279 Answers

SOURCE: noisey 407 deisel engine 2ltr 2005 peugeot

have the bottom crank pully checked mate
the rubber bonding in the middle wears making it sound awfull

Posted on Dec 09, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a peugeot 206 1.1 2004


you need to read the engine management light when its lit up on dash that will then give you the error code to the problem.

Aug 27, 2016 | 2004 Peugeot 206

2 Answers

I have an 09 Peugeot 308 petrol. the fan kicked in and I got a faulty anti pollution msg even tho engine was cold Any ideas?


You need to scan the engine management computer and read the fault codes. Based on that info you can begin the diagnosis and repair.

May 23, 2016 | Peugeot Cars & Trucks

1 Answer

Hi I have a Peugeot 207 and my management light has came on saying antipolutoin can u help.


With any Engine Management light......this could be any number of faults and can only be determined by getting the code read!

Jan 01, 2016 | Peugeot Cars & Trucks

2 Answers

P0410


Take it to a qualified repair shop an have it diagnosed properly !

Dec 02, 2017 | Buick Cars & Trucks

1 Answer

How do I turn off check engine light after fuel sensor code Po 193


After the problem is fixed and the code is erased with a scanner or code reader, the light should stay off.

Feb 04, 2013 | 2005 Mazda Tribute

1 Answer

Peugeot 306 turbo deisel auto diagnostic light coming on. conditions frdidnt know if the freezing conditions could cause


Check that engine oil is atleast a grade of 10W40. If temperature is below 0°C then Standard engine oil mostly a cause of bad circulation.
To find out if its because of engine oil, drive the car (find out an empty motorway) 60MPH for at least 15-20 minute; come back home; turn the engine off: wait 2 minutes and then start again. if still there is check engine light, then the problem is something else.

Jan 09, 2010 | Peugeot 405 Cars & Trucks

1 Answer

Noisey 407 deisel engine 2ltr 2005 peugeot


have the bottom crank pully checked mate
the rubber bonding in the middle wears making it sound awfull

Oct 23, 2009 | Peugeot 405 Cars & Trucks

1 Answer

How can i reset the engine management light on peugeot 307?


274bd1a.jpg


The following is from peugeotdiesel.com bot seems to be valid for all models:
1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read '0' and the service symbol will extinguish.

Also, can disconnect the battery for a few minutes. This should clear the code. Unless you have fixed the problem that set the code it will come on again.

I hope help you with this (remember rated this help) Good luck.

Oct 06, 2009 | 2005 Peugeot 405

1 Answer

Engine management light is on


The car will need to be put on a diagnosic machine to point out exactly why the engine has gone into limp mode, but if it is still running it could just be down to a sensor, Hope this helps

Dec 04, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
2010 Peugeot 308 1.4 Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

xxxxxx xxx

Level 3 Expert

5023 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6571 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...