1992 Oldsmobile Silhouette . Previous owners cut off master power window switch pigtail and rigged it. I purchased new switch but need a picture and/or diagram of the wiring so I can wire it. .
Pretty self explanatory, have a mess of wires and need to know where on the new switch they go!Have been unable to source new pigtail.I have a wiring schematic just don't know what positions on the switch they go.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Everything runs thru the drivers side master switch,may be the switch but.. look inside the rubber boot between the door and the body(razor blade)The wires tend to break in there due to the drivers door being used more than the rest.A wire connector or some fancy soldering work is the only fix without pulling the whole harness.
Yes , the switch is not making good contact in the UP possition... , I would take the switch housing off and see if the contacts can be cleaned... or simply replace the switch with one from a salvage yard or autozone.
The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.
yes it sounds like the master switch if no windows work and the fuses are good.
I would think you should pull out the speedo cluster before i took out the whole dash. it could be just a connection or a printed circuit board.
1992 Saturn SL2 Car Stereo Radio Wiring Diagram
Car Radio Constant 12V+ Wire: Orange Car Radio Ignition Switched 12V+ Wire: Yellow Car Radio Ground Wire: Black Car Stereo Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 6 1/2′ Front Speakers Location: Doors Left Front Speaker Wire (+): Tan Left Front Speaker Wire (-): Gray Right Front Speaker Wire (+): Light Green Right Front Speaker Wire (-): Dark Green Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Brown Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Dark Blue Right Rear Speaker Wire (-): Light Blue