At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to test your fuses. Go through with a tester and test each one. Verify you haven't lost your ground straps running from the back of your block to the firewall.
tap the dash see if it comes back on. if not the control in the dash board may have gone. or push on the dash if it works then its not sitting propper to the plug on the back of the dash.
Pull off the negative battery cable and unplug the sensor. See if the gauge needle returns to normal. Try tapping on the cluster to unstick the needle. No luck? Replace the temperature gauge.
Sometimes a bad battery connection will cause gauges go hay wired. Turn your switch on but not over and see if your gauges do the same without the car running. try loosening the battery cables and reposition the post.
drop the gas tank and either replace the fuel sending unit connected to the fuel pump, or you can try to clean the contacts w/ a pencil eraser, just be gentle
×