Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 11, 2016
Answered

Torque settings head bolt hyundai 2.2 crdi 2006

Need torque settings on hyundai 2.2crdi cylinder head bolts

Answer This Question

1 Answer

magna buff

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Hyundai Master 3,828 Answers
  • Posted on May 11, 2016
magna buff
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Aug 29, 2014
Answers
3828
Questions
0
Helped
1113645
Points
21593

Is your motors head torques listed on

also has torque sequence page number reference layouts are bottom of the document

page 33 as a pdf

or page 50 of paper listings

http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

Testimonial: "nothing of 2.2crdi D4EB ENGINE"

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 08, 2008

SOURCE: 2005 Tucson

camshaft sprocket bolt 58-72 ft. lbs. crankshaft pulley bolts 108-132 ft. lbs. crankshaft pulley center bolt 80-94 ft. lbs. cylinder head bolts cold engine 65-72 ft. lbs. warm engine 73-80 ft. lbs. cylinder head rear cover bolts 69-86 in. lbs. flywheel/Driveplate bolts 94-101 ft. lbs. intake/Exhaust manifold nuts/Bolts 11-14 ft. lbs. jet valves 13-16 ft. lbs. main bearing cap bolts 36-39 ft. lbs. oil pan bolts 51-69 in. lbs. oil pan nuts 43-60 in. lbs. oil pan drain plug 33 ft. lbs. oil pump cover bolts 72-84 in. lbs. oil pump relief valve plug 29-36 ft. lbs. oil pump sprocket nut 25-28 ft. lbs. Rear oil seal retainer bolts 84-108 in. lbs. rocker arm shaft bolts 14-15 ft. lbs. rod bearing cap nuts 23-25 ft. lbs. silent shaft sprocket nut 22-28 ft. lbs. spark plugs 15-21 ft. lbs. thermostat housing-to-Engine bolts 86-114 in. lbs. timing belt tensioner bolt 32-40 ft. lbs. valve cover bolts 43-61 in. lbs. water pump-to-Engine bolts alternator brace bolt 14-20 ft. lbs. all others 9-11 ft. lbs. water pump pulley bolts 72-84 in. lbs.

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 17, 2009

SOURCE: Angle Torque settings head bolts

Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

martin538

steven martin

  • 117 Answers
  • Posted on Apr 13, 2009

SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees

Anonymous

  • 8 Answers
  • Posted on May 01, 2009

SOURCE: need cylinder head bolts torque settings for nissan 3.2d

what nissan model do you need the head torques for

Anonymous

  • 233 Answers
  • Posted on Sep 17, 2009

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2006 Nissan Almera. 1.6 automatic. Can I please get the cylinder head bolt torque settings for it?
Here you go, the year is close enough.

What are the Nissan almera 2004 1.6 16v cylinder head ...

 Answers https://www.answers.com > What_are_the_Nissan_alm...
Feb 22, 2023 - THE NISSAN ALMERA 2005 1.6 16V CYLINDER HEAD TOURQUE SETTINGS. 1.Tighten 29N.M using the correct sequence. 2.Tighten 50°. 3.Tighten 55°.

..
Read full answer
Aug 31, 2023 • Nissan Cars & Trucks
0helpful
1answer

2007 Hyundai azrea limited v6 3.8 need to change head gasket do I have to loosen the timing chain tensioner if so where is it
yes, yes and yes, and are all seen here in photo1 below.
lambda II engines. 3.8L
38 steps, +18 more on step 19, and 56 steps just for removal.
just to get the cover off is 31 +19 steps.

the service manual covers all this
a crank locker and cam locker is needed special tools.(or diy made)
https://eautorepair.net/Marketing/Default.asp

DO not mix cam caps up, each are precision made and matched to head exact spot location. cams block head bolts.
gee read the manual first


differ, body but engine is 3.8, and all steps he did 56 steps not show.
he shops step 57 , head off, and coolant pipe off.

https://youtu.be/kIBdNcWm958

38-undefined-undefined-0.jpg

the head bolts are TTY bolts set by angle and are never REUSED
TTY= torque to yield.
quote

Install cylinder head bolts.
  1. Do not apply engine oil on the threads or under the heads of the cylinder head bolts.
  2. Using SST(09221-4A000), install and tighten the cylinder head bolts and plate washers, in several passes, in the sequence shown.
    • Step 1-Tightening torque: 28-30 ft. lbs. (37-41 Nm)
    • Step 2-Tighten an additional: 120° plus or minus 2°
    • Step 3-Tighten an additional: 90° plus or minus 2°
  3. Tighten bolt (A) to: 14-17 ft. lbs. (19-24 Nm).NOTE
    Always use new cylinder head bolts.
    Uniformly loosen/tighten and remove/install the 16 cylinder head bolts, in several passes, in the sequence shown-3.3L and 3.8L engines

Read full answer
Jun 18, 2023 • Hyundai Cars & Trucks
0helpful
1answer

Complete head torque settings for hyundai getz 1.4 16 valve g4ee engine 2006
  1. First, tighten all the bolts to 25 Nm (18 lb-ft).
  2. Tighten all the bolts to 50 Nm (37 lb-ft) in sequence, starting from the center and working outward.
  3. Tighten all the bolts to 70 Nm (52 lb-ft) in sequence again, starting from the center and working outward.
  4. Finally, tighten all the bolts an additional 90 degrees in sequence again.
Please note that it's important to follow the correct torque sequence and to use a torque wrench to ensure that the bolts are tightened to the correct specifications. It's also recommended to replace the head bolts with new ones to ensure proper torque and head gasket sealing.
Read full answer
Apr 07, 2023 • Hyundai Cars & Trucks
1helpful
1answer

Hi.. May i know hyundai atos 1.0cc conrod torque
Yes, I can help you with the cylinder head torque wrench setting for your Hyundai Atos 1.0cc. Here are the torque specifications:

First pass: Tighten all bolts to 18 lb-ft (25 Nm)
Second pass: Tighten all bolts to 45 lb-ft (61 Nm)
Third pass: Tighten all bolts to a final torque of 65 lb-ft (88 Nm)
It's important to tighten the bolts in the correct sequence. The sequence is as follows:

10 6 2 3 7
9 5 1 4 8

Note: The numbers above refer to the cylinder head bolts in the correct sequence. Always use a calibrated torque wrench to ensure that the bolts are tightened to the correct specification.

I hope this helps you with your cylinder head installation. If you have any further questions or concerns, feel free to ask.


Read full answer
Mar 03, 2023 • Hyundai Cars & Trucks
0answers

Please confirm torque for 95 accent 1.5 head bolts.Thanks
Read full answer
Be the first to answer Feb 02, 2017 • Hyundai Accent Cars & Trucks
1helpful
1answer

I need the cylinder head torque setting on a Kia Sorento CRDi 2.5 model 2008 please.
  • Fig100321
Cylinder head Renew bolts No Tighten 24 Nm Tighten 49 Nm Tighten120 degrees Tighten90 degrees
Read full answer
Dec 06, 2016 • Kia Sorento Cars & Trucks
2helpful
1answer

I need the cylinder head torque settings for a hyundai getz 1.6 16 valve double overhead cam Engine cod G4ED
renew bolts
stage1- 30NM
stage2-90deg
stage3-individually slacken off 360deg
stage4-30NM
stage5-90deg

crank pulley bolt-142NM
cam sprocket bolt-88NM

i like to help people like you that give engine codes it makes it so much easier
Read full answer
Jul 20, 2016 • Hyundai Cars & Trucks
0helpful
1answer

Need head bolt torque specs for a 1996 saturn sl
Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.
Read full answer
Sep 19, 2013 • 1996 Saturn SL
3helpful
1answer

Need cylinder head torque specifications 2004 hyundai elantra
Install the cylinder head bolts. Starting at top center, tighten all cylinder head bolts in sequence as shown in illustration, using the Cylinder Head Bolt Wrench (09221 - 32001) or equivalent. Repeat the procedure, re-tightening all cylinder head bolt to the specified torque. (torque spec is Cold Engine 105-115 Nm (76-83 ft lb) )
. Install the timing belt tensioner pulley.
. Install the timing belt on the camshaft sprocket, making sure that the tension side is tightened by turning the camshaft sprocket in reverse, all timing marks are in alignment.
. Adjust the timing according to "Timing Belt"
. Install the rocker cover and tighten the bolts to the specified torque. Tightening torque: Rocker cover belt:

2.5-3.5 Nm (25-35 kg.cm, 2-3 ft. lbs.)

. Install the timing belt cover.
Install the new intake manifold gasket and the intake manifold. Tighten the nuts and bolts to the specified torque.
Install the new exhaust manifold gasket and the exhaust manifold. Tighten the exhaust manifold attaching nuts to the specified torque.
. Install the surge tank and tighten the nuts bolts to the specified torque.
. Install the power steering oil pump and bracket.
. Install the ignition coil.
. Install the air intake hose.
Connect the vacuum hose, fuel hose and water hose.
. Install breather hose.
Read full answer
Dec 22, 2010 • 2004 Hyundai Elantra
2helpful
1answer

Just need the torque secuence in the accent 2001 for the cylinder head bolts
1.5L cylinder head bolt torque

step 1 18 ft lbs.

step 2 60 degrees

step 3 additional 60 degrees

1.6L cylinder head bolt torque

step 1 26 ft lbs.

step 2 90 degrees

step 3 additional 90 degrees


johnjnail_30.jpg
Read full answer
Apr 08, 2010 • 2001 Hyundai Accent
Not finding what you are looking for?

View Most Popular

Cars & Trucks

Related Question

2006 Nissan Almera. 1.6 automatic. Can I please get the cylinder head bolt torque settings for it?

  • Nissan Cars & Trucks

2,992 views

Ask a Question

Usually answered in minutes!

Popular Questions

Car won't start after filling up the gas tank.

2004 Hyundai Santa Fe

Hyundai santa fe starter were

2004 Hyundai Santa Fe

Dome lights don't come on

Hyundai Santa Fe Cars & Trucks

My drivers side rear door will not open from the inside or outside

2007 Hyundai Santa Fe Limited

Check the accelerator position sensor on the pedal!

2004 Hyundai Santa Fe

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-2003 Santa Fe...

2003 Hyundai Santa...

PDF Manual
Manual. user-manual-2003 Santa Fe...

2003 Hyundai Santa...

PDF Manual
Http://www.hmmausa.com/uploadedFiles/M...

2007 Hyundai Santa...

Loading...