At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The dodge does have an office but it is built into the liquid line , the smaller aluminum line coming from evaporator core. You have to replace the line itself. Advance auto parts or autozone has that line.The dodge does have an office but it is built into the liquid line , the smaller aluminum line coming from evaporator core. You have to replace the line itself. Advance auto parts or autozone has that line.
You can't post conmments that contain an email address.
It is in the inlet of the AC compressure high pressure hose to the evaporator on most models, if it not there it is part of the high pressure hose assembly.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://dodgeforum.com > ... > 3rd Gen Ram Tech
I cant find my orifice tube location a 2007 dodge ram 1500 with a 4.7 engine. Might be better to put this in the 3rd gen Ram forum instead of 2nd gen Dakota.
The AC orifice tube on a 1997 Chevrolet Cheyenne 4.3 ltr vortec v-6 truck is located in the small inlet tube of the evaporator. The high pressure liquid line must be removed to gain access then the orifice tube can be pulled out with a pair of needle nose pliers.
Terry,I think its in the evaporator, some times in one of the condenser lines, Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
The orifice tube is located in the evaporator inlet pipe at the liquid line connection. The evaporator is located in the right rear side of the engine compartment. .
The orifice tube is located inside the liquid line where it connects to the condenser. This line is located on the passenger side of the car and has the low side charge port on it. this line unscrews right where the orifice tube is located... Hope this helps
A/C Evaporator Core Orifice
The A/C evaporator core orifice (19D990) should be replaced whenever the A/C compressor (19703) is replaced for lack of performance (internal damage).
The A/C evaporator core orifice, located in the condenser to evaporator tube (19835), cannot be serviced in detail as a component of the line. If replacement is necessary, follow the procedure outlined for Liquid Line Removal and Installation.
An orifice tube replacement service kit may be used as an optional service procedure.
Refer to Section 12-00 for information regarding the use of an A/C Evaporator Core Orifice Replacement Kit E5VY-19D695-A.
-----------------------------------------------------------------------------------
A/C Evaporator Core Orifice Replacement Kit Installation
Discharge A/C refrigerant system. Refer to System Discharging and Recovery as outlined.
Remove condenser to evaporator tube (19835) from vehicle.
Locate A/C evaporator core orifice (19D990) by three indentations or a circular recess in metal portion of the condenser to evaporator tube.
A/C Evaporator Core Orifice Location
Note angular position of ends of condenser to evaporator tube so that it can be reassembled in correct position.
Cut a 63.5 mm (2.5 inch) section from condenser to evaporator tube at A/C evaporator core orifice location. Do not cut closer than 25.4 mm (1 inch) from start of a bend in tube.
A/C Evaporator Core Orifice Section Removed From the Liquid Line
Remove contaminants from the two pieces of the condenser to evaporator tube.
NOTE: The inlet half of the condenser to evaporator tube will be positioned against the A/C evaporator core orifice tabs when correctly assembled.
Lubricate fitting with clean refrigerant oil and assemble orifice tube kit (with A/C evaporator core orifice installed) to condenser to evaporator tube. Make sure flow direction arrow is pointing toward evaporator end of the condenser to evaporator tube, and taper of each compressor ring is toward compression nut.
The dodge does have an office but it is built into the liquid line , the smaller aluminum line coming from evaporator core. You have to replace the line itself. Advance auto parts or autozone has that line.
×