At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Something has probably come loose inside the door panel. This video is good at explaining how to take off the panel and explore the mechanism. https://www.youtube.com/watch?v=MkC2OiOiE_U
I had a P0500 code on my 2006 Toyota Sienna AWD limited edition. I changed the speed sensor and now it will not change gears. Does the transmission need to be reset or is there another issue I am missing?
2000 Toyota Sienna Stereo Wiring
Constant 12V+
Blue/Yellow
Switched 12V+
Gray
Ground
Brown
Illumination
Green
Dimmer
n/a
Antenna Trigger
Black/Red
Antenna
Right Front
Front Speakers
6 1/2" Doors
Left Front (+)
Pink
Left Front (-)
Purple
Right Front (+)
Green
Right Front (-)
Blue
Rear Speakers
6 1/2" Side Panels
Left Rear (+)
Black
Left Rear (-)
Yellow
Right Rear (+)
Red
Right Rear (-)
White
This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however: You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.
Hi, first thing is to check the power steering pump reservoir to see if its empty. if so, fill to specs. if the problem still exist, make sure the power steering belt is tight and is free spinning and the pulley is working as well.
×