Question about Nissan Cars & Trucks

1 Answer

How to set radio mode on a nissan almera 2004

Display screen on dash board shows mode off and radio will not turn on to enable code to be entered.

Posted by dolly on

Ad

1 Answer

clark

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Nissan Master
  • 1,288 Answers
Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: I have Nissan ALMERA 2001

any nissan dealer should be able to give you code

Posted on Sep 09, 2008

Ad
Landyman

Karl Molich

  • 89 Answers

SOURCE: radio screen doesn't show but plays

There is a problem inside the radio and a specialist needs to strip and repair if possible.Check with your dealer if they know someone to do this.

Posted on Dec 04, 2008

Anonymous

  • 17 Answers

SOURCE: Radio Locked Up, due to wrong code entered.....

Leave the radio on for one hour and the radio will reset. Works on all locked Mitsubishi radios. Dont go opening up the radio for no reason....

Posted on Jul 15, 2009

steve noel

  • 750 Answers

SOURCE: Problem with 2002 Nissan Almera Key Fob

check the battery in the key control it may be faulty

Posted on Jul 21, 2009

Anonymous

  • 1 Answer

SOURCE: how do I remove the service spanner symbol from a

Try this: With the ignition ON but radio OFF, press in and hold the INFO button and turn volume control until the menu appears. Now choose CONFIRMATION and Enter. Go down and select SERVICE and press Enter. Select RESET and then Enter. Backup to the main menu and now turn ignition off. This should remove it.

Posted on Feb 14, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vauxhall meriva wont start after changing flat battery.the message safe is showing on dash board


Make sure ignition is switched on, hold down button AS and turn on the stereo. Wait for the beep, then release button AS. Display should now have 4 dashes ----. Enter correct code using the radio preset buttons 1 to 4. Once code is entered, press and hold down button AS again until code is either confirmed or denied. WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.
or you could buy something from these folks:
http://www.m-99.co.uk/Car_Radio_Decode/car_radio_decode.html
Car radio code calculator Decode Serial Digital mileage adjustment...

Feb 06, 2015 | Vauxhall Cars & Trucks

1 Answer

How can I unlock the radio on a 2001 Saturn ls300


I need more information. When the radio is on, does the display show 4 lines like this. ---- or does it spell the word "lock" on the display. If it says "lock" , you must take it to a G.M. dealer .
If it shows the dash lines, then turn off the radio.Turn the key to "run". Hold the preset buttons 5 & 6 down for 5 seconds or so until you see the ----. Using the seek /scan button, enter 0000.If it doesn't unlock, then some other 4 digit code was previously entered. Off to G.M. you must go.

Aug 02, 2014 | 2001 Saturn L-Series

1 Answer

Need radio code but radio in dash


When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Renault service centre and get them to enter this code for you.

Dec 30, 2012 | 2005 Renault Grand Espace

2 Answers

Radio won't work


When you disconnect your battery or remove the fuse and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio.
The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your vehicle manufacrurers service centre andget them to enter this code for you.

Jan 30, 2012 | 1987 Chevrolet S-10 Pickup

1 Answer

I push in the wrong radio code 3x on my 2001 audi now its stuck on safe mode and wont let me in to push in the right code


First of all you should exit from safe mode. Then turn ON the radio and let it turned ON for at least one hour, in order to exit from safe mode.

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of a 2001 Audi Concert radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

---------------------------------------------------------------------------------------------------------------------------------


Audi Delta CC Radio

tdisline_914.jpg
Please perform the following procedures while the car is parked. Otherwise you risk getting into an accident while your attention is not focused on the driving. Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM1/2 and DX buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM1/2 and DX buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.


Oct 27, 2011 | 2001 Audi A6

2 Answers

Hi I got a 2002 audi a6 the radio displays safe but even if I keep scan and rds buttons pressed nothing happens.wat is the solution


it depends on year of car and make of RADIOHERE IS THE SETTINGS FOR A 2002 AUDI A6 Quattro V6 2.7L Turbo (APB) engine code
For the Audi Concert Radio
YOU STILL NEED YOUR RADIO CODE TO ENTER THIS!!!!!!!!!!!! tell me if this work for you
Entering Anti-theft Code

The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.

1. Turn on radio. The radio display shows "SAFE".
2. Press the FM2 and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
4. Once the code shown on the display is correct, press the FM2 and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
5. The radio should unlock and be usable shortly afterwards.
6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
7. If you lose your radio code, contact your Audi dealer.

Note: Some European market Concert radios have a TP button instead of the FM2 button, so the description above with those units would require pressing the TP and the RDS buttons simultaneously.

Dec 03, 2010 | 2002 Audi A6

2 Answers

CD, Radio will not work, shows CODE on the screen


Yes this happens because the radio enters a security mode (anti theft) after you disconnect the battery terminals to it, I'm afraid you can not find that code on internet, you can either find it on your car's owner's manual or go to a Honda dealer ship and they'll provide you the security code for your car, not a big deal. Hope it helps and please rate the answer, as it helps me with my general ratings, thanks! P.S. comment if you need more advice

Mar 26, 2010 | 2004 Honda Element

1 Answer

Landrover cassette display appear "SAFE" This cassette model is XQE500550.How can fix safe mode.


If you have the correct radio code for the unit, just wait about an hour with the power on in the radio. The screen will eventually display (code) or (enter code) follow the directions in your radio manual to enter the code and the radio will be operational again. The safe mode is on because either the radio fuse blew, the battery was too low on charge or the radio was momentarilly disconnected from it's power source. Most common is low battery voltage. Charge your vehicle battery, locate the radio code, wait till radio displays CODE and enter the code an have happy tunes again.

Nov 30, 2009 | Land Rover Defender Cars & Trucks

1 Answer

Entering radio code


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Jun 07, 2009 | 1998 Audi A6

1 Answer

I have a 1999 Audi A6.


Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Mar 02, 2009 | 1999 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...