Question about 2005 Nissan Almera 1.6

1 Answer

There are times when the transmission slips into low gear and will not change up even at higher speeds. if i stop the car, turn off the engine then restart, the transmission performs normal.

Posted by Anonymous on

Ad

1 Answer

clark

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Nissan Master
  • 1,288 Answers
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Ihave code p0731 stuck in 1st ratio .. what mean that code?


obviously refers to auto trans , could just need the trans fluid level topping up or even changing , if this does'nt resolve the problem then a more in depth diagnosis would be required at a repair shop as could be the ECU for example but do the fluid checks and go from ther ,keep me posted

May 09, 2014 | 2009 Hyundai Azera

1 Answer

Transmission slip mainly at highway speeds


This does not sound good. It is possibly your O/D direct clutch or O/D brake slipping in the transmission. Seek a couple of specialist opinions.

Jan 13, 2013 | 1997 Toyota Camry

2 Answers

Code p0734 I just replaced eng. and trans. now have this code.


Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit Tech notes Start by inspecting the transmission fluid level and condition, and change fluid if necessary. When is the code detected? P0734 is detected when A/T cannot be shifted to the 4th gear position even if electrical circuit is good. P0734 NISSAN Description This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:

Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

Aug 09, 2011 | 1995 Nissan Altima

1 Answer

My came with a code po734 is that a big problem?


DTC P0734 - Improper Ratio for Fourth Gear.
P0734 is detected when A/T cannot be shifted to the 4th gear position even if electrical circuit is good.

This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:

Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting

Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Tech notes: Start by inspecting the transmission fluid level and condition, and change fluid if necessary.


Test and check it and send us ypur comments.

May 14, 2011 | 2000 Land Rover Discovery

2 Answers

Ford trauras trouble code 732 - was told transmission code 732 was being produced, what does a code 732 say?


P0732 FORD - Incorrect Second Gear Ratio
Transmission in second gear and the ECM detected an incorrect gear ration. This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:

Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting

Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Tech notes
Start by inspecting the transmission fluid level and condition, and change fluid if necessary.


Hope helps.

Apr 26, 2011 | Ford Taurus X Cars & Trucks

1 Answer

2001 kia sportage . transmission does not change


Popular Problems Checks
1. Car will not go into gear:
  • Gear selector cable has failed
  • Brake lock solenoid/brake light swtich has failed not allowing the gear selector to move out of "Park"
  • Excessively low transmission fluid (note: if car is operated for an extended amount of time with low fluid level the transmission will fail prematurely)
  • Shorted electrical component not allowing the PCM to control the transmission. Example: shorted fuse
  • Flex plate (flywheel) is broken completely not transferring engine power to the transmission.
2. Car goes into gear but then fades out of gear or is slipping while driving:
  • Transmission fluid is low
  • Transmission clutch discs or bands are worn out or burned
  • Faulty transmission shift solenoid.
3. Car goes into gear but does not shift out of first:
  • Blown fuse to the PCM controller
  • Faulty vehicle speed sensor (VSS)
  • Shorted second gear control solenoid
  • Faulty transmission controller (PCM)

Nov 23, 2010 | 2001 Kia Sportage

2 Answers

Transmission slips- Honda accord 2001


cost more to bulid than 2 replace with a used one

May 05, 2009 | 2001 Honda Accord

1 Answer

Nissan almera 2005, automatic transmission


gear shifter has got damaged so replace it with a new one.....

Aug 01, 2008 | 2005 Nissan Sentra

Not finding what you are looking for?
2005 Nissan Almera 1.6 Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...