Running lights & clearance lights wont turn off

What about them ? What front lights ? Headlamps , park lamps, marker lamps ? They don't work ?

Exterior Lamps
The exterior lighting system consist of the following lamps:
• The Headlamps
• The Daytime Running Lamps (DRL)
• The Clearance Lamps (Y92 roof rack only)
• The Cornering Lamps
• The Front Fog Lamps
• The Rear Fog Lamps (Export)
• The Park, Tail and Marker Lamps
• The Turn Signal Lamps
• The Stop Lamps
• The Backup Lamps

Park, Tail, Marker, License, and Clearance Lamps
The park, tail, marker, license, and clearance (Y92 only) lamps are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are requested. The I/P BATT fuse in the engine wiring harness junction block supplies battery positive voltage to both the park lamp relay switch contacts and the park lamp coil circuit. The body control module (BCM) provides a ground or control circuit to the park lamp relay coil circuit. When the park lamps are turned on, the BCM energizes the park lamp relay. Current flow is from the park lamp relay to the individual park lamp circuit fuses and to their respective park, tail, marker, and license lamps. The front park and marker lamps are grounded at G107 and G103. The tail lamps are grounded at G401 and G402. The license lamps are grounded at G401. When equipped with the Y92 roof rack option, the clearance lamps are grounded at G302. If the driver places the headlight switch in the ON position after the ignition switch has been turned OFF, the park, tail, marker, license, and clearance lamps will remain on until turned off or the battery runs dead.
The T PARK fuse in the rear fuse-relay block supplies battery positive voltage to a separate park lamp circuit connected to the trailer wiring harness.

Will these lights stay on for an additional 15 to 30 seconds or do they stay on until the battery dies? If it is a delay situation then it is related to the "Day Time Running Light" circuit and is by design. If it is staying on and wont shut off then the "DTRL" control module would be suspected and needs to be inspected. That module is sealed. Please let me know if you have other questions.

hi...
1.try checking the clearance in the spark plug if you have insufficient or more clearance you wont get spark check this.
2.check the wire coming to the spark plug.if power is not coming to spark plug there wil be discontinuity in the wire try replace it.

if you get the information which you needed please vote me by clicking the thumbs present in the underside of the page.

Hi Paul,

This should help,

Plug Types/Application
7 Way - RV Trailers, Horse and Utility Trailers
6 Way - Horse, Stock and Utility
4 Way - Utility Trailers

Columns are Color, Function, Mark on the plug.

Seven wire Trailer plugs:

Horse, stock or utility trailers:
White = Ground - 1
Blue = Electric Brakes - 2
Brown = Tail and clearance lights - 3
Black = Battery, aux power - 4
Yellow = Left turn/Brake - 5
Green = Right turn Brake - 6
Orange or Purple (not both) = Auxilliary or Reverse - 7

Recreational Vehicle:
White = Ground - 1
Blue = Electric Brakes - 2
Green = Tail and clearance lights - 3
Black = Battery, aux power - 4
Red = Left turn/Brake - 5
Brown = Right turn Brake - 6
Yellow = Auxilliary or Reverse - 7


Six wire trailer plugs:

Horse, stock or utility trailers:
White = Ground - GD
Yellow = Left turn/Brake -LT
Green = Right turn Brake -RT
Brown = Tail and clearance lights - TM
Red or Black (not both) = Battery, aux power - A
Blue = Electric Brakes - S

Recreational Vehicle: (color, use, plug mark)
White = Ground - GD
Brown = Right turn Brake - RT
Green = Tail and clearance lights -TM
Black = Battery, aux power - A
Red = Left turn/Brake - LT
Blue = Electric Brakes - S


Four wire plugs:
White = Ground
Yellow = Left turn/Brake
Green = Right turn Brake
Brown = Tail and clearance lights


Ground should be 10ga.
Others 14 ga

Best regards
Mike