I want to reset my service indicator on a e class 270 cdi

look to see if the trunk activation button is stuck down..if you dont use it.. disconnect it if need be..if it becomes an issue or pull the fuse for it..

you dont,you get to change the filter(s) and oil at 80k service........

Here the link is


http://www.pdfoo.com/resultpage21~mercedes-ml-270-service-manual-download.html

i own m b 270 class e.i start ,i go for about 100 or 150 mets then my car lose the power.i remove the key & restart ,again the same problem,if some on can help me

1. Make sure the doors are closed
2. Turn key to position 2,
3. press trip reset button 3 times, untill service indicator screen shows
4. Hold down the reset button and turn key to position 0.
5. while the key is at position 0, release the button and repress,
6. turn key back to position 2 while holding down the button
7. wait untill service resets.

this all has to be done within 10 seconds. it may take a few attempts.

Component Y3/6N3 speed sensor 3 is faulty,That is a transmission code...the trans speed sensors are MADE into a printed circuit board that connects to the valve body...MB part number is 140-270-08-61.. LIST price in the USA is $225. TAKES about 1.5-2 hrs to install

• you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

have you check the gearbox oil level / last gearbox oil service

i have a ford escape 4wd and when i go 40 km and over i get a vibration what is causing that vibrartion

Try this, it is the procedure for resetting the ASSIST computer on some Mercs
1...Turn Key to position No:2 in the ignition / steering lock 2...Press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second and turn the key to position No: 0 in the ignition / steering lock - release button 3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock
That should do it....The service indicator will reset and an acoustic signal may briefly sound
Good Luck..Let me know if it works?