A v engine most fwd cyl Is number 1 see?
Wow no year, no country, stated, hows that work for you?
the cylinder the most front (forward) is always #1
from #3 on other side, even odd banks.
we dont have Fronterl here, in usa,
so not sure what v6 is there
Holden
GM
African Isuzu,
not a clue. here.
?
SOURCE: Firng order 1994 passport v6?
Play safe. Set the engine to TDC (top dead centre) and then the rotor arm will point to the No1 cylinder. From there you should be alright.
SOURCE: which cylinder is the number one on a Honda 3.0L v6
number "1" cylinder is all ways the one at the front of the block on the left side
SOURCE: i need to know where
the aulternator has the adjuster attached to it loose the bolt press the aulternator against the engine the belt will tighten keep it pressed and tighten the bolt
SOURCE: isuzu 320 KB v6 camshaft timing diagram posted to wrong forum.
Here is a diagram, I just want to make sure we have the correct information or engine damage will occur. double check these specs. 1999 ISUZU TROOPER V-6 WITH A 3.2 OR 3.5 ENGINE.
Here are two diagrams to line up camshafts and crankshaft. hope this is helpful. good day.
SOURCE: where is number one cylinder on a V6 lexus es300?
sorry to say my alldata doesnt list no1 cylinder ,but engine can be timed to any cylinder ,1 to 6 without any timing marks but you would need to have studied at college for 6 yrs like me to do this but trust me its not complicated ,bring up any cylinder to top then look at the cams ,if in doubt ask a local mechanic to have a look dont play as if its wrong you could bend the valves and in extreme circumstances knock a hole in a piston crown
Testimonial: "your alldata sucks every engine has a number one cylinder. go back to your 6 year vocational school"
222 views
Usually answered in minutes!
×