Question about 2000 Mazda MPV
Posted by Anonymous on
Tips for a great answer:
Sep 01, 2018 | Cars & Trucks
CTD system, the RIM commands the instrument cluster to control the indicator only when the ignition switch is OFF.
PASS-Key?® III System The PASS-Key?® III system is designed to help prevent vehicle theft by disabling the engine unless an ignition key with a specific electrical value is used in the ignition lock cylinder. The PASS-Key?® III system operates independently of the CTD system. Protection is provided even if the CTD system is not armed. The components of the system are the ignition keys (black or gray), ignition lock cylinder, Theft Deterrent (VTD) module, Reader Exciter, Powertrain Control Module (PCM) and two starter relays (START 1 and 2) in the underhood fuse block.
Oct 06, 2016 | 1999 Cadillac Seville STS
The CTD system requests the IPC to illuminate the indicator only when the ignition switch is OFF. The CTD system uses the indicator in order to identify system status. For specific CTD condition that will illuminate the security indicator, refer to Content Theft Deterrent (CTD) Description and Operation .
The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
SERVICE THEFT SYSTEM The radio illuminates the SERVICE THEFT SYSTEM message when the VTD system detects a failure. The radio receives a message from the theft deterrent control module via the serial data circuit requesting illumination.
This is one you need to take to the dealer , unless you have a GM factory scan tool !
Nov 21, 2015 | 2004 Cadillac CTS
Diagnostic System Check - HVAC Systems - Manual in HVAC Systems-Manual for 2.2 L with DTCs
Diagnostic System Check - HVAC Systems - Automatic in HVAC Systems-Automatic for 4.3 L with DTCs
The Diagnostic System Check will provide the identification of the control module(s) which command the system.
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
Review the Description and Operation information to help you determine the correct symptom diagnostic procedure when a malfunction exists. Reviewing the Description and Operation information will also help you determine if the condition described by the customer is normal operation.
Apr 13, 2015 | 2001 Oldsmobile Bravada
Jan 05, 2014 | 2001 Mazda MPV
Aug 13, 2010 | 2003 Saturn VUE
Aug 06, 2010 | 1996 GMC Jimmy
Dec 29, 2009 | 2003 Renault Sportwagon
64 people viewed this question
Usually answered in minutes!