Question about Cars & Trucks

1 Answer

Have a 1998 olds regency..bad interior..potential donor car is a 1996 olds 88...are these seats compatable as far as bolt up and electric connectors?

Read above...want to put 96 olds 88 front seats in a 1998 olds regency

Posted by Phillip Smith on


1 Answer

Dan Hooper

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,594 Answers

You should be fine, if there is a difference in connectors, at least you will have the ones off of your car that you can graft onto the new ones. The colors should be the same thou.

Posted on Feb 12, 2016


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Driver electric seat stopped working.

Google "used oldsmobile parts", that will take you to vendors who take them apart and sell the parts off one by one. You may have a large auto recycler close by and i would start by searching their website, often you can search their inventory on line. I live in appalachia and we have two local junkyards with web searchable inventories so this service should be everywhere in civilized US. plus a search will show you how many other GM power seats will fit that year and model. You are going to want a used seat, and you do not want to ship it, there are no new seats and to repair an old seat is not feasible as there are no parts and would cost far more than a serviceable used one. you want the newest, and lowest mileage donor vehicle you can find. the electric motor in that seat, and in all other seats, is going to die eventually from use and age, just like the whole car. if possible i would find a manual seat, just bolt it in the same mounting holes and live with it as a replacement power seat is going to die eventually also. you may have to get seat covers to make them all match.

Jan 10, 2011 | 2001 Oldsmobile Silhouette

1 Answer

How much to get interior done over

It depends on how bad everything is, you could need new foam, seat material, headliner, door panels, carpet, etc. It coulkd cost anywhere from $500- $1000 dollars. Your best bet would be to find a Donor Car at a Salvage yard and take out what you need.

Jun 16, 2010 | 1994 Buick Century

1 Answer

Trying to remove driver's seat. How do I do it?

the seat is held into the floor by four bolts, two at the front and two at the back, you need to slide the seat right back all the way so you can see the 2 front bolts their is one either side and they are in the metal runner and then the same with the back slide it forward as far as you can and you should see the two back bolts.

if they just turn without undoing then you need to get some one else to help you and go under the car and hold a spanner on the nut under neath it should be a fixed nut and should undo from inside the car.

if their are any electrics then they are held in to a block connector just under the seat unclip this and you should be ok.

their may be caps on top of the bolts so if you cant see them then look for caps the bolts should be far forward in either side of the runner so it should be right at the front.

let me know if you have any problems ok

Jun 07, 2010 | 2002 Volkswagen Passat

1 Answer

Which years are compatable with 1995 subaru legacy Ls wagon inte

I do believe that from 95 to 99 are direct fit replacement seats. The seats may vary in options but should bolt right in. Good luck and have a great day.

Feb 05, 2010 | 1996 Subaru Legacy

1 Answer

Remove front seat

SECTION 501-10: Seating 1998 Escort/Tracer Workshop Manual REMOVAL AND INSTALLATION Seat —Front Removal
NOTE: Driver side seat shown, passenger side seat similar.
  1. Slide the seat to its rearward position.
  1. Remove the front seat track to floor front bolts.
  1. Slide the seat to the forward position.
  1. Remove the front seat track to floor rear bolts.
  1. Disconnect the safety belt warning indicator switch electrical connector.
  1. Remove the front seat.

Dec 06, 2009 | 1998 Ford Escort

1 Answer

Describe how to remove the seats from a 2002 dodge stratus

simple, remove the headrest,move the seat forward fully remove the bolts 15 or 18 mm heads that hold the rear of the seat track move the seat rearward remove the final 2 bolts holding the seat set the seat as far forward as possible and remove the seat after unplugging any electrical connectors of corse

Aug 06, 2009 | 2002 Dodge Stratus

1 Answer

My electric seat adjustments on my 97 olds regency arent workin and either is the electric side mirror adjustments,what causes this and is this an easy fix?

There is a fuse and or a relay you need to be looking for. Also for the fuse to be blown something has had to have shorted out. It could have been water causing the short or you have a bad wire somewhere grounding out.

Aug 02, 2009 | Oldsmobile Regency Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6495 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides