Question about Cars & Trucks

Open Question

How do I fix a turn signal problem?

When the headlights are turned off and I signal right the front signal doesnt flash. The right rear hyper flashes. When I signal left both front and back flash normal. I changed the front right signal bulb and the problem still occurs. When the head lights are turned on and I use the right signal the front bulb still won't flash but both right and left rear signals hyper flash. Also when the head lights are on and I use the left turn signal the front left signal flashes normal but both left and right rear signals hyper flash. Since changing the front right signal bulb did not fix the problem, what might fix my turn signal problem???

Posted by Robert on

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: right turn signal

have the same problem, sounds like you will need to get a new light socket (where the light bulb goes into).... it is a easy fix. cost approx $30-$50 at dealership for part

Posted on Oct 08, 2008

Ad

Anonymous

  • 196 Answers

SOURCE: electrical problem

Find the ground wire on one of the lights and add another ground wire to a good clean metal surface and see if that fixes the problem. It defently sounds like a ground problem at one of the lights.

Posted on Jan 07, 2009

Ad

Richard Scordino

  • 6982 Answers

SOURCE: turn signals blinking fast and stop when brakes applied

likely not, but change /check anyhow....If problem persists, likely you will need to change the module that controls directionals (usually under dash to the right of steering column)

Posted on Apr 27, 2009

Anonymous

  • 1 Answer

SOURCE: Turn signal problem

broken ground wire

Posted on May 08, 2009

Anonymous

  • 140 Answers

SOURCE: Left turn signals won't flash, Right side works fine. Replaced front and rear turn bulbs (rear was burned out). Bulbs come on fine on the left side, they just won't flash.

Gday mate, we had a problem with another late model vehicle similar to that, the bulb that was put into the reverse light was not exact brand product ( ohmage was slightly wrong ) and fowled up computer, correct bulb in place and disconnect battery to reset K A M ( keep alive memory) problem solved, BEWARE, some vehicles cannot have KAM reset except for dealer computer tethered reboot , just try putting the factory correct bulb(s) in and see how it goes, geoff. hope this helped.

Posted on Feb 11, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Rear turn lights don't work but the front ones do. Before when the headlights were on the rear turn signal lights would not work but would work fine when the headlights were off. When I turn the headlights...

The best solution you'll get from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembl ing dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc
0helpful
2answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights

was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles
0helpful
1answer

Jeep brake lights

Check for the bulb,or any bad connection.
0helpful
1answer

Brake/Signal Lights Problem.

Sounds like a ground problem to me. Bulbs are not getting there ground to complete the circuit so they backfed through the other bulbs.
0helpful
1answer
1helpful
1answer

Electrical problem

Find the ground wire on one of the lights and add another ground wire to a good clean metal surface and see if that fixes the problem. It defently sounds like a ground problem at one of the lights.
0helpful
1answer

Right turn signal

have the same problem, sounds like you will need to get a new light socket (where the light bulb goes into).... it is a easy fix. cost approx $30-$50 at dealership for part
Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

285 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

john h

Level 3 Expert

25748 Answers

Brad Brown

Level 3 Expert

18859 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7015 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...