At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
have = means HAD?
tell them to do it again,and this time correclty.
all fuses good?
no factory scanned DTC codes.
take it back.
or a real ASE shop. to do it right, (USA answers only) see?
On many vehicles, there is a VSS (vehicle speed sensor) that is used with the ABS system. If it fails, the ABS and BRAKE lights will come. As I don't have ESC, I can't vouch for it being involved, but it is related. Usually replacement of the defective sensor will clear all fault indications.
ESC= Electronic Stability Control and is part of the ABS braking system, the button to turn this off is the same button to turn it on! Press once for off and again for on!
The regular brake warning light is for the parking brake being applied or the brake fluid is low. You would need to get the abs system scanned for trouble codes to proceed.
speed sensor or wheel bearing as well brake problem or burnt fuse a few things to check if worst comes to worast unplug battery and replug battery wait 15mins before plugging battery back then go for a ride if it lights up as soon as you start there is a power problem or sensor problem if you drive it and comes on latter then you have a sensor problem or brake problem
dear friend-please take note that the esc and abs works back to back meaning that the esc applies brakes when wheel is spinning and abs release the brakes when wheel is in lock-up,these functions gets a signal from the wheel sensors,if one of the wheel sensors is damaged the lights will stay on,i think you should hook up to a scanner before repairing anything.
×