Question about 1995 Nissan Maxima

Open Question

The wiring order on the firing on a 1995 Nissan Maxima V6

Nissan Maxima 1995 V6 spark plug wiring

Posted by Lorna Lyte-Mason on

Ad

5 Related Answers

ourhowse

Dar

  • 2007 Answers

SOURCE: my nissan maxima will not start

Check timing belt. Shoot a timing light down at your crank. If the timing mark jumps around bad, your belt has slipped.

Posted on Jun 18, 2009

Ad
Ad

Patrick Rayome

  • 1757 Answers

SOURCE: order to put wires on nissan maxima

For the 1993 Nissan Maxixa 3.0L:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)
1.......3........5
2.......4........6
......(front)

Distributor Connections:
...(back)
............1
......6
5.................2
............3
......4
..(front)

Posted on Mar 28, 2010

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: need firing order and diagram

1999 Nissan Maxima GXE 3.0 liter DOHC V-6 (VQ30DE)

9481c27.gif

Hope this help.

Posted on Apr 01, 2010

GARYca

Gary M

  • 672 Answers

SOURCE: How to change spark plugs on the v6 Nissan 2000

For the 3 spark plugs in front:
1. You would have to remove the plastic protective cover (this cover is silver&red w/ the words "nissan and v6 3000")
2. unplug connector and remove coil (DO NOT mix up the coils, keep the same coils on the same cylinder)
3. Remove spark plug

Rear 3 plugs: located on the rear of the intake (the black pipes atop the engine). there are 3 openings at the rear of the black intake pipes, each opening has a coil mounted.
1. Unplug coil connector and remove coil
2. remove spark plug (you'll need a long extension)
***Installation is reverse, be sure not to over tighten the plugs!! Use anti-seize compound on all the new plugs threading. Hopefully this helps!!

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 nissan maxima that is running rough and occassionally stalls out. We have replaced the spark plugs and wires and run fuel injector cleaner through it. Cant afford a lot so trying to run through...


check your MAF sensor first..thats what it was on my 4th generation Maxima after tearing down the whole tbi system and what not....just pull out the sensor itself and clean it up, see if thats it, if not....idle control valve probably. or wiring.

Jul 23, 2011 | 1995 Nissan Maxima

1 Answer

Got a 1995 nissan maxima with 179,000 that hesitates or misses.


hello, also check plug wires,distributator, cap and rotor button, you can check plug wires,at knight time, crank engine, with hood up, walk around car, look at plug wires while motor is running, see if any sparks are coming from plug wires, also if it clunks, like you said, you may have broke motor mount, transmission mount, check for air lines leaking also

Apr 08, 2010 | 1995 Nissan Maxima

1 Answer

How to change spark plugs on the v6 Nissan 2000 Maxima?


For the 3 spark plugs in front:
1. You would have to remove the plastic protective cover (this cover is silver&red w/ the words "nissan and v6 3000")
2. unplug connector and remove coil (DO NOT mix up the coils, keep the same coils on the same cylinder)
3. Remove spark plug

Rear 3 plugs: located on the rear of the intake (the black pipes atop the engine). there are 3 openings at the rear of the black intake pipes, each opening has a coil mounted.
1. Unplug coil connector and remove coil
2. remove spark plug (you'll need a long extension)
***Installation is reverse, be sure not to over tighten the plugs!! Use anti-seize compound on all the new plugs threading. Hopefully this helps!!

Apr 01, 2010 | 2000 Nissan Maxima

1 Answer

1995 nissan maxima


It has a chain. they usually do not have problems with them.
Check to see if you can hear the fuel pump come on with your ear up to the open gas cap whil;e someone tries to start the car for a second.
You should hear it come on for four seconds.
if it comes on, then check for spark at the spark plug wire with a spark tester.

Feb 16, 2010 | 1995 Nissan Maxima

1 Answer

95 nissan maxima wont start


I had a 94 which i fixed this same type of problem by putting in a new distributor

Aug 26, 2009 | 1995 Nissan Maxima

1 Answer

My nissan maxima will not start


Check timing belt. Shoot a timing light down at your crank. If the timing mark jumps around bad, your belt has slipped.

Jun 18, 2009 | 1995 Nissan Maxima

1 Answer

Service Engine light flashes for short time on highway Runs Rough


You need to have the system tested for trouble codes, Kragen and Autozone parts stores do this for free.

Apr 14, 2009 | 1995 Nissan Maxima

Not finding what you are looking for?
1995 Nissan Maxima Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...