Wipers won't work??? - CarGurus
www.cargurus.com > Questions > Chrysler > Town & Country
CarGurusFeb 15, 2012 - 1998 Chrysler Town & Country LXi My windshield wipers won't work. The turn ... I have a Plymouth Horizon & the same problem, but I'm fairly sure it's theswitch on mine. ... Ended up taking it to the dealership - it was a wiring problem from the body control module to the switch. ... Used Dodge Caravan".
Auto Repair : How to Test a Windshield Wiper Motor ...
? 3:04
https://www.youtube.com/watch?v=7EliY2Hwj0E
May 12, 2009 - Uploaded by ehowauto
In order to test a windshield wiper motor, the first thing to do is to make ... He said its the relay and the entire ...
Windshield Wiper Motor Replacement : How to Access a ...
? 3:37
https://www.youtube.com/watch?v=iVBAvvfc1FU
Oct 1, 2008 - Uploaded by expertvillage
Removing windshield wiper arms and intake grading is essential to gaining access to the windshield wiper
SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?
Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.
SOURCE: R&R Starter 1999 Plymouth Voyager w/3.3 V6
The likely problem is the contacts in the solenoid on the side of the starter. Does the solenoid click when trying to start the car? Disconnect one battery cable before doing anything with it. I fixed mine by removing the end of the solenoid case and building up the badly eroded input terminal bolt head with silver solder--worked great. You have to work under the car to get to these parts--use jack stands for safety.
SOURCE: 1995 dodge dakota. Wipers switch only clicks
there are grounds that join behind batter remove battery check for corossion clean up and rejoin splice should work again
SOURCE: replace blower motor 1998 plymouth voyager
it is located behind and below the glove box,you might want to remove the glove box assembly to see it easier,
there are four screws holding a blower motor cover you to take off first,now remove the screws holding the blower motor up,disconnect the motor wires.
if your changing this because you think its bad,you should test the blower motor wires with a test light with the key on and blower switch turned on.if you have power in the wires,then it is bad.
but if you have no power in wires it could be blower motor resister,or switch.
440 views
Usually answered in minutes!
×