SOURCE: how to put on a serpentine belt.. fo a 89 dodge
Find the belt routing diagram (under hood or on radiator support). put a wrench on the center bolt at the idler pully push or pull to loosen belt.
SOURCE: 1994 dodge dakota automatic shut down relay not
Replace the relays with a new one and you'll see. ok.
SOURCE: WHERE IS THE PCM ON A 98 DODGE DAKOTA
The PCM is located on frame rail behind the air breather
SOURCE: 2001 dodge Dakota 3.9 p1686 done everything but change pcm
are there any problems with the instrument cluster ? It may be the Smart Key Immobiliser Module , SKIM , not communicating with the security system , it will need a dealer equipped workshop to replace and reprogramme a new module as no diagnostic etc can be performed , as is the security system, hope this helps , the instrument cluster question is to help with a diagnosis, as this is associated with the SKIM failing
SOURCE: Can voltage regulator be replaced in 96 dodge dakota pcm
No. But you can cut the wire from the alternator that goes to the ECM and ground it. This will let the alternator charge when running. Just remember , that every time you turn the key, the alternator is one also. Meaning if you run your radio, the alternator is kicked on and get hot and die early.
161 views
Usually answered in minutes!
×