Where is the heater core located? - 1984 Oldsmobile Delta 88

Inspect/Replace

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core

The best way to locate a heater core hose is to determine where the heater core is located. Many vehicles have the heater core inside the dash. Other vehicles, usually larger vans and trucks, will have a heater core box inside the engine compartment. Once you have determined where the heater core is located in your vehicle, that will allow you to easily locate a heater core hose. If the heater core is inside the dash, you'll need to examine the firewall for the hoses. If it is in a heater box, you'll need to look around the engine compartment for the box.




Heater cores located inside dashes can be very difficult and time consuming to replace. Depending on the layout of your engine compartment, it can also be difficult to locate a heater core hose. If there is very little clearance between the engine and the firewall, you may have difficulty finding the hoses. You might need to use a flashlight to look from the underside in some cases. You will typically be able to identify the heater hoses where they enter the firewall by looking for two two small diameter hoses that protrude into the engine compartment. You can then trace those hoses to their other ends, where they will typically connect to a thermostat housing, the radiator, or a t-connector.


Hope this helps.


know more about your car

need to replace heater core

behind the glove box!
Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core.
Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

behind glove box!
Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core.
Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

the heater core is located in the heater case under the dash you need to remove the dash to remove the heater / a/c case to access the heater core