Cars & Trucks Logo

Related Topics:

Shane Ferguson Posted on Jan 10, 2016

My truck wont shift out of 2nd gear. was pointed to the ignition switch the truck will start but the yellow wire to the switch has no juice in either position. Would this put the truck into limp mode?

  • Jeremy W.
    Jeremy W. Jan 10, 2016

    Hi Shane Ferguson, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? you did not tell us the year, make, model, or engine size.......?

  • Shane Ferguson
    Shane Ferguson Jan 10, 2016

    Sorry about that its a 1997 Chevy Silverado Z71 4x4 5.7l

×

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 05, 2009

SOURCE: automatic transmission is stuck in 2nd gear (limp mode)

most newer vehicles  have transmission control modules,that go to a default of 2nd or 3rd gear when they go bad!  I had a 91 plymouth stuck in 3rd gear because of this module! could be your problem!    when mine went out, it smelled like something electrical burned inside the the passenger cabin! I would check all the electrical connections on the transmission first    good luck   

Ad

Anonymous

  • 7 Answers
  • Posted on Jan 05, 2009

SOURCE: Transmission in limp mode?

the neutral safty switch tells the comp. what gear is in. when its not working the light wont move and the car will not go threw the gears prop. the switch is nown to go out. it is located on the tranny or down under the shifter

Anonymous

  • 192 Answers
  • Posted on Apr 05, 2009

SOURCE: 1998 honda accord transmission goes into limp mode

the vehicle may have a electrical problem and or mechanical problem in the trans....id try replaceing the solenoids and then the entire transmision and torque converter.

Anonymous

  • 3 Answers
  • Posted on Jan 10, 2010

SOURCE: 2004 Volvo XC90. Ignition key will sometimes not

spray ignition with graphite

Anonymous

  • 2 Answers
  • Posted on Apr 01, 2010

SOURCE: automatic transmission is stuck in 2nd gear (limp mode)

it is eletical eather a fuse is blown or the speed sensor didnt get hooked up dose spedo work

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Auto transmission shift lever in PARK engine wont start.

Check ignition switch in column. Or check the shift position sensor on tranny it might help
0helpful
1answer

What makes my 2002 Merc Sable have three little short pauses like misses when it shifts from 1st to 2nd gear.

Sounds like a coil breaking down. Try this for a test, get going to around 45 mph and lightly accelerate, is the is miss is reproduced then the most likely cause is the secondary ignition system. I.E plugs or wires or a coil.
0helpful
2answers

Wont start or shift

Battery
Starter Solenoid
Bad Starter

Any number of things

No internet site or a guessing-- will be of any value
to you

The vehicle has to be in the hands of folks that know how
to do the proper testing, to find a problem,always been that
way with any product
3helpful
1answer

Is it ok to start off in 2nd gear and manually shift up to 3rd and then overdrive?

You can put the shifter in 2, 3, or overdrive. It will still start in first and shift up to whatever gear you have selected. Try it, you wont damage anythingl
0helpful
1answer

Where is the transmission control module 2003 kia spectra

Here a PRNDL 2_29_2012_5_01_18_am.gifStaring in 2nd gear either the PRNDL is out of alignment and/or position sensor switch if off alignment 2nd gear indicator on you car is now neutral. look along gear selector cable its not attach to the transmission correctly
1helpful
1answer

I have a 2000 GMC sierra 2500 truck. The guy I bought it from had a new transmition put in it. After driving a while I noticed that the tranny wouldn't shift into low gears 1st & 2nd on comand. and...

-----check possible tps [throttle position sensor ]circuit for damage or faulty sensor----if good check the fuses and trans harness for shorts damage or disconnection,check o2 sensors wiring possible ground to exhaust ,or internal leak 2nd gear apply circuit[servo assembly or 1-2 accumulator] or poor pump pressure
0helpful
1answer

The truck is not getting juice

check your ignition fuses under the hood on the left side.? 2.2 4 cyl or 3.0 v6 or some time your ignition switch contacts could be worn.or wire to coil
0helpful
2answers

Starter trying to restart while idoling

Sounds like either an ignition problem. (Switch, not the lock cylinder) or a short somewhere between the switch and the starter relay.
0helpful
2answers

1995 GMC 2500 4x4 wont shift into 3rd or overdrive most of the times

i have heard that the ignition switch can be faulty and not let the full voltage thru to the electricaly controlled 4l60e trans.i have the same problem with my 95 1/2 t. i rigged a switched wire from the fuse block via a relay to the proper wire on the trans....ask a trany tech and they will know what im talking about,,,good luck
Not finding what you are looking for?

919 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...