2010 Dodge Grand Caravan Logo
D
Dennis McKee Posted on Jan 03, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Power lock drivers sliding door lock wont unlock

It doesnt work manully or remote key

1 Answer

Milton Graham

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Dodge Expert 267 Answers
  • Posted on Jan 17, 2016
Milton Graham
Dodge Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Jun 30, 2012
Answers
267
Questions
4
Helped
59090
Points
628

The lock is in door mechanism that holds the door closed

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Apr 21, 2009

SOURCE: 2002 Dodge Grand Caravan Driver Door Lock/Unlock Switch

sorry not sure the 12v prob will help this swtich works on 5v off 3v unlock 1v lock single wire lock/unlock logic signals
I found wiring diagrams at
http://www.dodge.com/bodybuilder/2004/docs/wd/rswd/tc.pdf
it is 2004 but use the wiring diagrams to test the wires
(most likely to fail where they flex)
because it is using logic gates disconnect the plug at each end of the wire you are testing or the damn thing will find a few diffrent ways to trick you.

Ad

Robert Debison

  • 412 Answers
  • Posted on May 14, 2009

SOURCE: 2006 Dodge Caravan - ONE power door lock stopped working

i have replaced many sliding door lock actuators on these vehicles..dealer part..mostly on passenger side sliding door..also possible you have a broken wire in door track harness..follow wiring from door into what looks like a plastic chain in door track at door opening

Dave Leoni

  • 66 Answers
  • Posted on Jun 03, 2009

SOURCE: 2004 Dodge Ram 1500 Quad Cab Drivers side power door lock broken

Sounds like the link rod to the latch are jammed in the locked position by something inside the door or it came off. Any way, you have to remove the door panel to get access to it.

Anonymous

  • 4 Answers
  • Posted on Mar 28, 2011

SOURCE: 2005 Grand Caravan power door lock quit working.

The lock actuator is probably broken in that door. We got one of the internet for 80$ and replaced it outselves and it solved this problem. IOD fuse is very temporary fix as system is sensing problem and flipping to protect itself like the breaker switches in the house.

Anonymous

  • 118 Answers
  • Posted on Jun 13, 2012

SOURCE: 2006 dodge caravan sxt passenger door sliding door won't unlock or open at all, manually or by remote

U will have to take the inside door cover off and manualy open it. And replace the electric door locking switch. Very common problem. Get the new lock and latch assembly from dealer,

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Honda Odyssey slide door light on.

Here are the codes you posted along with the possible issues that may have caused each code to be triggered. It's possible the circuit these switches share has a problem that needs to be diagnosed.

It could well be a problem with the wiring or a problem with the connections between the switches and the Multiplex Control Unit, or possibly with the Multiplex Control Unit itself.

B1129

  • Driver Side Door Lock Knob Switch Signal Error
  • Faulty Driver Side Door Lock Knob Switch
  • Driver Side Door Lock Knob Switch harness is open or shorted
  • Driver Side Door Lock Knob Switch circuit poor electrical connection
  • Faulty Door Multiplex Control Unit

B2077

  • Right Power Sliding Door Remote Control Switch 1 Signal Error
  • Faulty Right Power Sliding Door Remote Control Switch 1
  • Right Power Sliding Door Remote Control Switch 1 harness is open or shorted
  • Right Power Sliding Door Remote Control Switch 1 circuit poor electrical connection
  • Faulty Right Power Sliding Door Control Unit

B2078

  • Right Power Sliding Door Remote Control Switch 2 Signal Error
  • Faulty Right Power Sliding Door Remote Control Switch 2
  • Right Power Sliding Door Remote Control Switch 2 harness is open or shorted
  • Right Power Sliding Door Remote Control Switch 2 circuit poor electrical connection Faulty Right Power Sliding Door Control Unit

B2079

  • Right Power Sliding Door Remote Control Switch 3 Signal Error
  • Faulty Right Power Sliding Door Remote Control Switch 3
  • Right Power Sliding Door Remote Control Switch 3 harness is open or shorted
  • Right Power Sliding Door Remote Control Switch 3 circuit poor electrical connection
  • Faulty Right Power Sliding Door Control Unit
1helpful
1answer

Both Power Locks Lock But Wont Unlock. Remote will unlock the doors

If the remote key fob locks and unlocks the doors then the problem is more than likely the power lock switches, this is a common problem on the Venture Van.
4helpful
2answers

How do I get my key remote to lock/unlock my toyota rav4 2002 model? I changed the battery because I thought that was the problem but it is still not working. The red light on the remote comes on but then...

You will need to try reprogramming the remote 1st, below is the complete procedure. If the reprogram doesn't restore function then you will need the dealer to test the keyless entry system, you may have a bad module or remote (only applies if both remotes don't work).

Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.
0helpful
1answer

I unhooked the battery now i cant stop the horn and it wont start the remote key does not work it got washed in clothes help please.97 camry

Lock then unlock the doors with the power lock button, with all doors closed (key not in ignition). If this doesnt work, try again using the key to lock and unlock from the driver door, with all doors closed.
0helpful
1answer

Car doors wont lock with remote

Sounds like the rod that goes from the lock to the key came off. There is usually a little plastic clip that holds it together and they break and you get what you are experiencing. You have to take the inside panel off of the door to get inside it.
0helpful
1answer

Driver and Passenger auto door locks are inop.

Sounds like bad wiring, or bad door lock actuators. Check for power while locking/unlocking the doors.
1helpful
1answer

Drivers door power lock wont work.

Either the wring going to that motor or the motor itself is bad.
0helpful
1answer

2000 Safari, power locks,Rear dutch door wont unlock,

can you use the key its self on the rear door. what i mean is not using the remote but actually using the key?
Not finding what you are looking for?

349 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...