Question about 2008 Jeep Commander 5.7

1 Answer

WHERE IS THE REMOTE COMPASS MODULE ON A 2008 JEEP COMMANDER

Posted by RON BOONSTRA on

Ad

1 Answer

_-__-___-_

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Wow no symptoms stated just the boring where is it...
but great question, names car and year, clearly
we've posted the full fsm online here 100s of times.
here we go again.
down load it, then type , (after opening it)
control F, the type compass.
i wonder if a compass car has compass , omg.
i have 2010 and have same book.
did you scan the PCM yet, i bet not.
and its guess what, telling why it fails right now.
see page 8M-6 in book FSM.
the dtc shows car needs degaussing,, now.... see?
and if that error happens the compass goes blank, RTM?

8m-20
calibration, RTM
replacing first is "overthetop", why go there.
first are scans then tests.
or needs just a degaussing... (a tool)
page 27
"NOTE: In addition to the Universal Transmitter
operation the Electronic Overhead Module (EOM)
is responsible for some of the compass functions.
Anytime the EOM is replaced the compass variance
value must be set, (Refer to 8 - ELECTRICAL/
OVERHEAD CONSOLE/ELECTRONIC VEHICLE
INFO CENTER - STANDARD PROCEDURE - COMPASS
VARIATION ADJUSTMENT)."
not only that the PCM can lose commmications with this OEM.
so not scanning all modern cars, is a road to doom.
why skip scanning the car first and checking fuses.?????

scan first
ask questions 2nd.
my motto.... and WIN

Posted on Dec 31, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't have any idea how to change a signal module 2009 jeep compass


HAZARDS DEAD TOO>?????
no such thing that simply (pops out in hand)
check fuses first. F8 and F17 F33
then scan it next? you must scan newer cars. or its all just water under the bridge. (wasted effort and cash)
no symptoms posted., btw.
zero. just easter egg hunt,
you do know some jeeps there is no such module , right>?
i have the 08 book here,
lets see what's there.

this car has no such thing, the
here is the path, (block diagrams, in words)
Lets say you turn left. (or right or hazards)
the steering module sees that.
then IT, send to the network command to all what want to listen
you are turning.
then the Cluster brain sees that and flashes,(all by itself)
this same network command goes to the TIPM up front (under hood)
this is a complex set of electronics here.
and has 100% full electronic drivers inside that drive all blinker lamps. it receives, those commands and then flashes 1 of 4 drivers to do that.(transistor drivers) with electronic overloads.

does not work any thing like a 1993, old jeep,
so back to square one, no symtoms.

check fuses
scan it, you must scan it,
if say the cluster does not flash there will be errors reported
telling you what happened. even communications errors on the network called CAN-BUS

Dec 06, 2016 | 2009 Jeep Compass

3 Answers

Where is tcm on 2008 jeep compass located


scan first
do not play with these expensive parts
scan first.
if you ESD damage it , you'd be out, $1000 easy.
its not a blinker module like sold for $5
not close.
PCM 4x4 2.4L gas, usa.
68843c4f-6168-4b01-bb1b-b6a10eb21c96.jpg

Jul 04, 2014 | 2008 Jeep Compass

1 Answer

Remote start & keyless entry and radio does not hold clock time when key is off on 2010 jeep compass


main fuse is probably blown. its on constant power e.g for radio memory and other things that need the power on all the time.

Nov 29, 2013 | 2008 Jeep Compass

1 Answer

Compass module fallure escape 2008


I would check all fuses and replace any blown and retest. If the compass is still not working..I would make sure there is power at the compass module...If there is.. I would replace the module.

Nov 13, 2012 | 2008 Ford Escape

1 Answer

2008 Jeep Compass: Possible Electrical Problems...


I am having the same problem. Did you ever get it worked out? I would appreciate any help that you could give me.
Thanks,
Robert

[email protected]

Oct 26, 2009 | 2008 Jeep Compass

1 Answer

I have a yellow warning light on my jeep compass 2008


i have a 2007 Jeep compass and it seems to have lost power i can struggle to 100 mph on long flat road and that is my foot on the floor, theres just no power when i want it, also have the engine malfunction light on as well, im wonder is the turbo gone or is it something else

Aug 06, 2009 | 2008 Jeep Compass

Not finding what you are looking for?
2008 Jeep Commander 5.7 Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...