How to pull right rotor off a B2600 mazda 4x4

SOURCE: torque settings for pressure plate and fly wheel

the flywheel is 50 -60 ft.lbs....pressure plate is 15- 25 ft. lbs..

SOURCE: b2600 white smoke coming out of exhaust

i`ve never heard they are interchangeable, Are you sure its the head? i would inspect the #1 cylender a little further for a hair line crack

SOURCE: i need to set up the camshaft timing marks on a 1994 mazda b2600

its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

SOURCE: Hi guys I have a 1998 mazda bravo 4x4 b2600 I have

Do u have any engine check light on

SOURCE: How to change the front wheel bearings on a 2004 mazda bravo, b2600. Inner seal flush with rotor or firm against bearing?

the seal is flush with the edge of the hub and should be free from the bearing if where the seal is fitted is deeper than the width of the seal that may be that the manufacturer can use two different seal makes that have two different thick measurements