Question about Holden Cars & Trucks
Nov 5, 2011 - 7 posts - 4 authors
posted in Rodeo,Colorado and DMAX Technical: My reversing lights ... switch as per workshop manual..could someone throw me a bone here...thanks. ... Started By rodeo5 , Nov 05 2011 04:35 PM ... My 4WD:RA 07 Rodeo; State:NSW ... would say the reverse switch would be on the gear box some where ... ? 1:45
Nov 12, 2010 - Uploaded by TwoMagadan
Locate & Repair 96' Pajero Reverse Light Switch ... Replacing ABack Up Light Switch On A Manual ...
Posted on Dec 14, 2015
I would say the Trans computer is reporting a fault , Could be one of a million things in the trans.
You need to get the computer scanned to get the fault codes .When you get them let me know.
Posted on Jul 08, 2009
stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
5 2 4 8
Posted on Dec 05, 2009
The filter doesn't take any oil, but when they figure the quantity, they figure either filter change or rebuild, the filter change uses about 5 quarts and the rebuild is 12 quarts. I don't have the exact amounts in front of me, but if you need them,I can look them up. Also, I am not familiar with the Holden dual cab, But most automatics are about the same. Hope this helps.
Posted on Mar 08, 2010
Tips for a great answer:
Sep 25, 2017 | Cars & Trucks
Jul 03, 2013 | Cars & Trucks
Sep 25, 2012 | Holden Rodeo Cars & Trucks
Jan 31, 2012 | Holden Astra Cars & Trucks
Apr 19, 2011 | 2004 Isuzu Rodeo
Jul 24, 2010 | 1999 Isuzu Rodeo
May 27, 2010 | 2004 Isuzu Rodeo
Dec 03, 2009 | 2004 Isuzu Rodeo
448 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: