How to remove regulator from a 2008 hyundia elentra

SOURCE: HYUNDIA 1997 ELENTRA 1.8

http://www.2carpros.com/how_to/transmission_service_4.htm
Popular Problems Checks
1. Car will not go into gear:

• Gear selector cable has failed
• Brake lock solenoid has failed not allowing the gear selector to move out of "Park"
• Excessively low transmission fluid (note: if car is operated for an extended amount of time with low fluid level the transmission will fail prematurely)
• Shorted electrical component not allowing the PCM to control the transmission. Example: shorted fuse
• Flex plate (flywheel) is broken completely not transferring engine power to the transmission.

• Transmission fluid is low
• Transmission clutch discs or bands are worn out or burned
• Faulty transmission shift solenoid.

• Blown fuse to the PCM controller
• Faulty vehicle speed sensor (VSS)
• Shorted second gear control solenoid
• Faulty transmission controller (PCM)

SOURCE: noticed a strong gas smell in the passenger

The fuel pressure regulator located on the fuel rail that supplies the fuel injectors must be check for wetness it has a vacuum line going to it if it looks wet replace it if it checks out ok locate and check the purge canister it may be malfunctioning.

PAUL MC G

• 1280 Answers
• Posted on Sep 12, 2011

SOURCE: 1998 Hyundia Elentra needs either

Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc