Cars & Trucks Logo

Related Topics:

Tamara Bogle Posted on Nov 26, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where is the a.c. heater blend door actuator located on a 2005 crown victoria

  • Douglas Craig
    Douglas Craig Oct 16, 2022

    I have a 2002 crown vic there is a white line hanging on on my passger side like where the blend door at can u help me please

  • Douglas Craig
    Douglas Craig Oct 16, 2022

    I have a 2002 crown vic there is a white line hanging on on my passger side like where the blend door at can u help me please

×

1 Answer

Claude Kayser

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Cars & Trucks Master 9,098 Answers
  • Posted on Nov 26, 2015
Claude Kayser
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 15, 2015
Answers
9098
Questions
0
Helped
5060298
Points
28436

Images for Where is the a.c. heater blend door ...

Fix Heat Door Actuator. - YouTube

? 6:17
https://www.youtube.com/watch?v=NkUPsacbYzc
Oct 7, 2012 - Uploaded by zephmont
My 2005 Crown Vic is blowing out a little heat at times but not how it normally does. .... actuator to press the ...

2003 ford crown vic Heat blender actuator fix - YouTube


5 Related Answers

harley9701ha

Bill

  • 424 Answers
  • Posted on Jun 22, 2009

SOURCE: cant find the blend door actuator on 2003 ford f150 super crew

The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Ad

Anonymous

  • 1 Answer
  • Posted on Oct 06, 2009

SOURCE: 2000 Chevy Silverado 1500 The heater does not

Had the same thing happen to my truck, the blen door actuator is under the console on passenger side, but the heater core is going to be clogged if you dont have any heat coming through, but a/c works..

Anonymous

  • 236 Answers
  • Posted on Oct 13, 2009

SOURCE: Where is the blend door actuator located? Is it a

buried in the dash, about an 8 hour job.

Anonymous

  • 1 Answer
  • Posted on Nov 25, 2009

SOURCE: blend door actuator needs replacing does the

no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Anonymous

  • 5 Answers
  • Posted on Dec 07, 2009

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2004 crown victoria. The ac will only blow hot air. Pretty much figured out its the blend door actuater. What's the best way to get to it???

I may be wrong since it has been awhile since I have had to do one, but if I am not mistaken the blend door motor is located on the back side of the air box against the firewall. The only way to access it is to remove the dash and the airbox from the vehicle.
0helpful
1answer

No cold air inside the car

try rechecking the blend door actuator and its connections, fuse, etc. also if your AC system is overcharged it will blow warm air.
0helpful
1answer

I have a 2005 crown victoria,i have it on heat,heat comes out the vent,and when i switch over to defrost,cold air come out..what's the problem/

may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: digiprog 3
0helpful
1answer

Ford crown victoria 2004 w/158194miles. DTC B1249.blend door failed or short

Is there ground?

Is there power and ground at the actuator?

Is there power or ground in the circuit when the system is off but the vehicle is running (Indicating a short to power or ground)
3helpful
1answer

Is the blend door motor hard to replace on a 2006 crown vic

This a 5.5 hr job, it is hard to replace the dash needs to be pulled, i just did one and not fun, customer would not have heat at times and it was blend door motor , this is located at the top of the heater box and you need to pull dash back to replace and it is still a little hard getting to one of the screws in the rear of the actuator, the heater box does not need to be removed but dash pulled out.
1helpful
1answer

2004 crown vic; cannot turn off heat

Probably the "blend door actuator" inside the dash..

It opens/closes a flap to allow air flow across
the heater core or the a/c evaporator.

Its basically an electric servo and position is controlled by the knob.
3helpful
1answer

Crown victoria Climate control is stuck on heat

ned to remove the radio and look at the blend door actuator on top of the hvac box. the actuator goes bad and doesn't move the door from hot to cold. if you see the actuator moving but still no cold air then the blend door could be broken.
1helpful
2answers

2006 crown Victoria blows hot air with the air conditioner on the air condition lines are cold under the hood

sounds like the temperature blend door is either jammed or the actuator is shorted ou. when the temperasture control is moved you should hear the door moving...my guess is you are not hearing that..the actuator would be attached to the heater plenum behind dash/glovebox area...becareful to test the correct one as there will be a fresh air actuator and a mode door actuator as well...you can determine which one is which by changing the positions on heater head from hot/col, floor/defrost, recirculate and fresh air settings..each setting will move its designated actuatror..the one not moving would be you temp actuator....have fun!
1helpful
1answer

Why want the heater switch from cold to hot

this problem is caused by a defective air temperature control blend door motor/actuator failing, this little motor moves a door deep inside the dash to either supply ho or cold air or a mix of the two air streams, hence the name "blend" door motor. to replace the part u must remove the dash assembly.
2helpful
1answer

Heater not working

If the controls seem to work properly, but with no temperature change, diagnostic self test will have to be performed by a professional to find a bad electrical component like an actuator for the blend air door. The door itself could also be damaged so it doesn't move when commanded. Ford may have a technical service bulletin for the issue, which your dealer can look up. It shouldn't cost anything to ask. Sorry I can't help you more.
Not finding what you are looking for?

997 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29490 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...