At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the fuel pump Relay.....Make sure Oil Level is correct......Low oil sensor latches the Relay.....Will shut down if more than 1 quart low...........
Probably not. There are often vacant positions in fuseboxes, relay boxes and the various other locations electrical and electronic equipment is sited..
If you need to locate the ABS ECU you need to discover the official location, which could be almost anywhere - behind the dash or behind kick panels, behind the glovebox...
I don't think there is a rollover switch on a '91 wagon.
The ECU supplies ground to the fuel pump relay for only about a second and a half if there is no ignition pulse. This is what shuts off the fuel pump in the event of an accident. The transistor in the ECU that provides this ground signal fails after a couple of decades. Repairing it is not a do-it-yourself operation but there are rebuilt ECUs available from multiple sources. Be sure to get an ECU that is compatible with your vehicle configuration.
check you ecu. same problem happen to me in an izuzu rodeo. I let my fuel get to low and it sucked dirt into the filter and messed with that and it set off a code for the ecu and messed it up but if i had just replaced the ecu first i wouldnt have had to change the injectors or anything.
next time it wont start, pour hot water over ecu, if it starts replace ecu, you will need a scanner to reset as it will go into theft mode when you fit new ecu, beware that this is a common fault and you can buy 2nd hand faulty computers.
Hi... On your question For ECM to 1987 Nissan Stanza..
Are 6 Available number .
2 are for vehicles 4WD. Incl. wagon. Calif emissions. 2261A-20R66RE,
with out calif, 2261A-20R06RE,
2 For vehicles FWD Wagons only. Calif emissions, 2261A-20R75RE,
With out Calif emissions, 2261A-20R15RE.
2 For vehicles Sedans FWD Exc Wagon. Calif emissions, 2261A-D5507RE,
With out calif emissions, 2261A-D4507RE,
NOTE , " RE" Mean Remanufactured ECM. Is not available new.
Ok.. Are the number I have Based on Mitchell ondemand, Repair Software.
I hope this info help on your question.
Any more questions let me know...
×