Synchro ring is worn...
If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_573a00ba7e399076
SOURCE: Toyota corolla 2006 has a grinding noise when
If this is a manual transmission it sounds as though you have bad synchronizers for the 2nd gear...what I have done in the past is simply do not use that gear whenever possible to avoid unneccesary wear. It is a very costly job to repair this. You are better of driving it carefully as long as you can, make sure anytime you shift the clutch is 100% depressed before you move the shifter as well as while you make the shift into any gear at all. Do not release it until you are 100% into the gear you want as well. Most synchronizers are damaged by not shifting as I have described and/or jamming the shifter into gears when shifting. It is also critical to immediately have your transmission drained and have new gear oil / or transmission fluid added so that you are not cycling around the broken pieces of metal through the transmission. I have driven some cars like this for years and years. If it still works, do not waste you money on a rebuild...simply do what I suggested and drive carefully, avoid second when possible, and change that tranny fluid more often then reccomended,...GOOD LUCK
Does that transmission have external shift linkage? Sounds like a linkage broke or the neutral gate is way off.
SOURCE: 1996 Toyota Tacoma, 4X4 5 speed 6 cyl. club
Could be many things. Any major work done on it? Check motor mounts.
SOURCE: How do I replace bulb in a 2004 toyota tacoma sr5 in gear shift so I can see the gear PRND123
remove console. and....
the FSM covers every little step.
login to alldata.com turn to shifter page and bingo.
ALLDATA OEM Auto Repair Information for Professionals
The leading provider of original...
143 views
Usually answered in minutes!
×