Hello,
If you oil levels are ok and your not burning or loosing oil then they only thing that it could be is that you have a faulty oil switch, try replacing the oil switch hopefully this should make the red light go out.
Regards
jimba
Bad oil pressure sender unit.or low oil pressure.put a pressure gauge and measure it.check for oil leak around oil pressure sender
Actually the port to the switch could be clogged. You could remove the switch and start it for a few seconds and see if oil blows out of the hole. These switches usually don't fail but leak instead. The fix is to blow air in the switch hole and open it up.
278 views
Usually answered in minutes!
×