I need to remove the dash in 2005 chevy silverado
to remove the dash in your truck you will need to dedicate about 8-10 hours. first start with removing your kicker panels, then the plastic covers on your a-pillars. remove the bezels around your instrument panels. you should be able to see some black screws by now, they should be a 7mm some may be a 5.5mm start removing all the screws you can. next you will need to un plug all of your switches, airbags(yellow plugs), 12v accessory plugs, be sure to remove your battery cables before unplugging all of this. your dash cover is a pain to remove so be patient with it or you will break it easily. to remove your dash cover remove the screws in the front and you will have to pop the back of dash up then remove. next you will need to remove your steering wheel/column this is easily done however you will need alot of extensions for your ratchet to do this. after pulling your steering wheel/column remove the four screws by your windshield to remove your sub-dash i believe they will be a 10mm. remove your sub-dash. next you will need to remove the dash support frame, you will need a 15mm and a 10mm socket to do this, i believe there is 5 bolts holding this on. if needed you can remove the black box that holds your fan heater core blender door cab filters and etc... to do this you have to remove the ac hoses coming out of your dryer can going into the firewall, this will bleed out all of your freeon, next remove the heater hoses, now there are 7 bolts or nuts to remove on your firewall, when you remove those you can pull out the black box.
×