The trunk release lever will not open the trunk. the trunk will open when the key is used but not by the release lever.
The release lever it located by the fuel latch on the floor, on the drivers side of the vehicle. The cable from the latch to the release handle is connected and will move the latch but will not pop the trunk.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: The trunk release lever will not open the trunk. the...
So, when somebody else pull the cable, do you see the latch move back and forward from the trunk? There is nothing complicated about a manual cable, it just pull the cable and there should be a reaction to it. If there is no action from the latch, no movement at all, then the cable is just broken. If there is a little movement, not enough to pull the latch to open the trunk, you still need to replace the cable.
Testimonial: "ok. yes the latch does move back and forth when the lever is pulled. just not actually popping the trunk"
Add Your Answer
Tips for a great answer:
- Answer the question.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Every vehicle is equipped with the safety feature call of release lever once you locate your release lever you will be able to gain access to your trunk get on YouTube find out where it is call the dealership find out where it is
May 5, 2014 - Uploaded by Nissan USA
2015 NISSAN Versa Sedan - Trunk Release. Nissan USA ...From inside the vehicle, pull up on the open lever. ? Unlock the trunk using the key. ... Press and hold the trunk button on the Intelligent Key.
The rear seat backing will have to be removed to access the paneling and lock assembly to open if the lever/remote is non functioning. Sometimes banging with your fist just above the lock while someone operates the release lever will open the trunk
If release lever is not functional, use key. If key will not turn in cylinder, spray WD-40 into cylinder and use sawing motion to get key inserted and continue sawing motion to free up lock wafers internal to cylinder so it will turn with key. If this process is not effective, you will need to remove rear seat to access paneling to trunk lock and open accordinly
It locks the lever that opens the trunk of the car so you wont be able to use that lever to open the trunk from inside the vehicle. The master key should fit in it. You will still be able to open the truck with the key on the outside right at the trunk with the key even if you have the lever locked. It's a security thing. I hope this helps.
Can you access the trunk through the rear seat if you can you can (have some one with you) go in the trunk and in the trunk youll see a lever with a glow in the dark tab. Pull it the trunk should open,Manufauctuer now make these trunk release levers mandatory.Now you can trouble shoot the reason for it not to able to open. look along the release machanism is it binding does the key (if ti uses a key) turn feely maybe lubricating it will work,
I was able to unlock my trunk by using a wood pole to operate the interior safety unlock handle, which is located just above the trunk floor, against the rear of the trunk lid. You simply insert the wood pole between your rear seats, while attempting to locate the handle release. When you find the handle, use the wood pole to push down on it.
Then, I had to take the top of the truck mat loose by using a flat head screwdriver to pry the plastic plug holders loose from the trunk. I also had to use a 10mm socket to loosen the trunk locking mechanism. Once inside, I notice the remote release cable ball had dislodged from its slot. I simply placed the ball in its slot and reassembled the trunk.
Actually, this car has security system that prevent the trunk opened without using the master key. I often use this to lock my trunk. Just slid up the tiny lever upward to allow the trunk open from inside. the lever is on the back trunk (in the center, behind the Tail light) where the trunk door hook up with the lock system. Cheers..