Question about 2001 Audi A6
They said it was behind the glove box how do you get to it
Yes, It sounds like they did not reset the maintenance reminder. refer to your owners manual for instructions on how to do so...
Chevy forgets to do that to mine just about every time!!!
Posted on Feb 27, 2009
SOURCE: AUDI A6 WINDOW PROBLEMS
This is a common problem with the C5 A6 models. Before you replace the fuse for the windows (I think it's number 14, but i don't have a manual in front of me - Anyway, it's the 10A fuse that's blown!) Look under the back of both front seats and you'll see a light that illuminates the floor for the back seats. Rem ove the light from each seat by prying it out with a flat screwdriver and disconnect both leads. Replace the fuse, and your windows (moon roof and interior lights as well) should now work. The lumbar support causes something to short out the lights. I've tried insulating the lights on mine, but the problem always comes back so I just disconnected them altogether.
Posted on Jun 15, 2009
I just saw your posting. Yes, It could be a fuse, a 10amp interior light fuse BUT... I had to replace the Central Locking Control module which toasted first... I had the 3 open door, no working lights/windows situation too...
The problem seems to be in the main cabin light which has the 3 way rocker switch. Turn this off (depress the side on the driver side of the car (US)). Check the 10 amp fuse for the interior light. If it is burnt, you are OK if its not, you need to replace the Central Locking module. ~$200 US
I still have not replaced the cabin light module where I think a short is. If I replace the fuse in question, and turn the cabin light on, it "pulses" for a few minutes and then cooks the fuse.
Posted on Jun 29, 2009
Tips for a great answer:
Mar 08, 2015 | 2001 Audi A6
Aug 13, 2011 | 2001 Audi A6
Mar 13, 2011 | 2007 Audi A6 Avant Wagon
Jun 01, 2010 | 2004 Audi A6
Apr 13, 2010 | 2005 Audi A6
Mar 30, 2010 | 1998 Audi A6
Aug 16, 2009 | 2000 Audi A6
Mar 01, 2009 | 2001 Audi A6
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: