I need to locate a diagram for the vacuum lines on a 3.0 v6 standard for a 2001 ford ranger

https://www.google.com/search?q=2001+ford+ranger+brake+line+diagram&rlz=1C1AFAB_enUS452US453&oq=2001+ranger+brake+lines&aqs=chrome.2.69i57j0l4.12624j0j7&sourceid=chrome&ie=UTF-8

This link has a lot of diagrams you can look at to help you.

Check out the diagram but if that's not helpful click the link and you'll find what you're looking for! https://www.google.com/search?q=01+ford+4.0+sohc+vaccum+line+routing&rlz=1CDGOYI_enUS827US827&oq=01+ford+4.0+sohc+vaccum+line+routing+&aqs=chrome..69i57.21729j0j7&hl=en-US&sourceid=chrome-mobile&ie=UTF-8#imgrc=_

Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Escape 3 0l V6 Engine Vacuum Leak Testing
Escape City Ford Escape Forums Ford Escape Mercury Mariner Mazda Tribute...
Remove Upper Intake Manifold 2002 Mazda Tribute Part 1 Detaching...
2001 mazda tribute 3 0 LX Detailed vacuum EGR hose routing diagram Google...

1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Matthew, I assume you have replaced the missing carb with a new one, is it an OEM original? or an after market? It matters what carb you put on because of smog laws and whether or not the carb you bought is smog legal for your truck, if it is not the exact same as the factory original then there wont be a correct vacuum line schematic. If when you do have the correct replacement carb then type in (1985 ford ranger, v6 2.8l vacuum line diagram) in to your google search engine, search under " images" there you will find lots of diagrams of vacuum line routing. If you are not able to do any of this then take the truck to a qualified service tech, there are also mobile service mechanics that can help, good luck to you sir. One final note, you can plug each of the vacuum outlets on the carburetor with the appropriate size vacuum caps, this will allow you to start the engine and make minor adjustments, then you can drive the truck to a qualified tech

I had the same need on an 87 firebird what I did was go to the junk yard find the same truck with same engine and trace the lines make my own diagram, and in my case buy the hard plastic formed vacuum lines that were broken. hope that helps

2.3 L 4 cyl.


3.0L V6

Fig. 19: Vacuum hose routing-1989 2.3L EFI engines; calibration 9-50K-R00




Fig. 20: Vacuum hose routing-1989 2.9L EFI engines; calibration 9-65F-R00



Hope this help (remember rated this).

Check out the autozone.com website and register the truck there. It doesn't cost anything and will give you access to an online repair manual for the truck. The vacuum diagrams should be available there. Hope this helped and best wishes.