SOURCE: WHERE CAN I BUY A NEW CAR KEY FOR AN OLDSMOBILE INTRIGUE 99
You can call any GM dealer, but don't try to find an Oldsmobile dealer, GM phased out that division in 2004.
SOURCE: how do i install a 1998 oldsmobile intrigue water pump?
you need to go buy a Chilton. There is a litle more to it than telling you a couple of things on a web page. Also if your car has a 4 cylinder and you are replacing the water pump, something they don't tell you is you have to replace the timming belt also. If you don't you will be replacing them both again in a couple of months.
tepfy
SOURCE: 2002 OLDSMOBILE INTRIGUE GX engine light on
There are many emission sensors in the car that will make the engine light come ON. Not to mention the big list of trouble codes for the engine light.
Best way to find out what's going on engine light is to have an auto-parts store hook up a engine code reader and tell you what the code means and the problem. Most auto-part store will do this for free.
SOURCE: i need to change my lower motor on a 2000 oldsmobile intrigue
it is under the glove compartment
SOURCE: What tools do I need to replace a starter for an
common ratchet and sockets. be sure to disconnect the battery. you may have to move things out of the way to get to it, but nothing to major.
1.Disconnect the battery by turning the positive terminal bolt in a counterclockwise direction with a 10mm socket wrench. Disconnect the terminal nut on the alternator by turning it counterclockwise with an open-ended wrench. Store the terminals away from the battery.
Disconnect the Intrigue's serpentine fan belt by pressing on the tension pulley arm firmly then working the belt out from underneath the idle pulley. Release the tension pulley arm so the belt will have enough slack to be removed from the alternator pulley wheel.
Remove the mount bolts by turning the nuts counterclockwise, holding the bolt head with a socket wrench. Slide the bolts out of the mount arms. Replace the alternator with a new unit by positioning it into the mount arms and sliding the bolts through the mount holes. Tighten all nuts securely.
Replace the drive belt by wrapping the belt around the alternator pulley wheel then pressing on the tension arm to slide the belt back underneath the idle pulley. Release the arm and the belt will tighten to an automatic adjustment.
Reconnect the alternator's wiring harness connection by placing the terminal over the connection bolt and securing the nut clockwise with a small wrench. Reconnect the battery by turning the terminal bolt clockwise with a 10 mm socket.
118 views
Usually answered in minutes!
×