Question about 2003 Mazda Tribute

1 Answer

Hazard light don't work

Locate hazard switch?

Posted by margarita orta on

Ad

1 Answer

Rick Hurd

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 285 Answers

The hazard switch is located in the middle of the dashboard, above the radio. If has stopped working, you can order a replacement here:

SWITCH HAZARD DASHBOARD SWITCHES for Mazda Tribute 2001 2006 EC01664H0B

Posted on Aug 30, 2015

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I do not have any turn signals or hazard light on my 2000 ford focus zetec how do i correct this


There is a flasher unit that controls both the normal indicators and hazard flashers, on a 98 ford escort it is fixed to the base of the indicator stalk switch, if you remove the shroud that covers the switches around the top of the steering column you can see the flasher unit, usually it is black and just plugs in to the bottom of the hazard and indicator switch. The unit should have an ignition supply to it as well as a perm ant supply when the hazard switch is pushed down. Sometimes these switches get sticky contacts so if you bang the switch on and off a few times it can sometimes make the contacts work and then then all the indicators start working again.

May 01, 2014 | 1998 Ford Escort

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

The hazard lights buzz and don't work.


if fuse okay,could have faulty multifunction switch.

Nov 20, 2012 | 1997 Chevrolet Malibu

1 Answer

I have a 2003 chevy malibu. I'm having problems with my blinker lights. They don't always work when I turn them on and at other times they work just fine. What could cause this?


Hello and welcome. this is almost always the hazard switch. inside the hazard switch is the turn and hazard flasher. the next time the turns dont work, try pushing in and out on the hazard switch and see if they come back on.

Aug 21, 2011 | 2003 Chevrolet Malibu

1 Answer

2001 jeep Tj pdc diagram trying to locate fuse for


sounds like it is either flasher or switch assembly.

Oct 08, 2009 | Jeep TJ Cars & Trucks

1 Answer

Turn signal switch


You likely have a sticking hazard signal relay or hazard switch. Try turning on the left or right turn signal then depressing and releasing the hazard switch a few times. If the lights begin working you probably have / had a sticking switch. They don't get used often and this is not uncommon. Also could be relay. Thats a cheap fix and easy to locate. Should be with fuse box or near it.

If this helps please rate my answers.
Brett

Mar 20, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
2003 Mazda Tribute Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...