At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Relieve the pressure in the fuel line before disconnecting it. To do so, you have to disable the electric fuel pump before you start the engine.To disable the fuel pump, do the following:
With the engine off, remove the fuel pump fuse from the fuse box. (Your owner's manual should show you where it is.)
Make sure that the parking brake is on and that the vehicle is in Park or Neutral, and then start the engine. It won't run very long after you start it up, but the pressure in the fuel lines will be reduced.
Turn off the engine. With the fuel pump disabled, you're ready to disconnect the fuel lines from the filter.
Look at the old filter and the new one before disconnecting anything.You should see an arrow stamped on both filters that shows in which direction the fuel flows through it. If the new one doesn't have an arrow on it, look to see in what direction the old filter is installed so that you can tell which end of the new filter goes where.
Remove whatever is holding the old filter in place and remove it.
Put the new filter on in the same position as the old filter.
Replace whatever holds the filter in place, and make sure it's secure.
Replace the fuse for the fuel pump in the fuse box.Make sure that the parking brake is on and that the vehicle is in Park or Neutral, and then start the engine and check for leaks around the filter.
are you sure it was the fuel filter the actual problem? may be the fuel pump went out? check to see if you have fuel in the tank some mechanics put some fuel in the fuel filter just like they do with the oild filter.
Since you have to take the old one out it would be best to go ahead and replace it. Whatever stopped the filter up you don't want in your Fuel injection.
I am not familiar with that model, but it dosen't sound like a fuel filter to me . If it runs good after you get it started,the filter is probably ok,i don't know where it is located on that model,but it sounds like you have already found the problem (low fuel pressure) check for leaks,make sure the lines are on the right places on tank .Whatever is causing low fuel pressure is probably the solution. hope this helps!
I would lean towards the fuel pump, but... How dirty was the old filter??? if it was bad then the new one may have picked up whatever was left in the line. I guess I would go the easy route, replace the fuel filter, this time with the filter off crank the truck and catch the fuel in a mason jar til it is clean, you may need to drain the tank and try to clean it out if it is real dirty. Hope this helped Tim
×