Dashboard light out - 2010 Hyundai Elantra Touring

Unfortunately, there is no single manual that explains all of the dashboard lights on a 2015 Chevrolet Utility 1.4. However, you can find information about the specific dashboard lights in the owner's manual for your vehicle. You can also find information about the dashboard lights on the Chevrolet website.

dashboard brake light flashing randomly - Forums.focaljet.com

forums.focaljet.com/.../662231-dashboard-brake-light-flashing-randoml...

May 14, 2012 - 12 posts
Car run great the only issue is the dashboard brake light is flashing randomly. ...Finally, the instrument cluster is hardwired to the ABS module, ... Also,i change the parking brake switch and the light goes on & off less frequent.

what does ABS flashing light mean at the dashboard of my 1996 ...

https://answers.yahoo.com/question/index?qid...

May 3, 2009 - What does ABS flashing light mean at the dashboard of my 1996 ... just hard enough to skid a tiny but, then back off a hair to stop skidding.

ABS Brakes Troubleshooting - How to Troubleshoot Anti ...

www.popularmechanics.com/cars/how-to/a461/2265091/

http://www.bing.com/images/search?q=1996+gmc+suburban+fuse+dashboard+lights&qpvt=1996+GMC+Suburban++fuse+dashboard+lights&qpvt=1996+GMC+Suburban++fuse+dashboard+lights&FORM=IGRE


1996 gmc suburban fuse dashboard lights Bing images

The dashboard lights don't come on when you have your parking light on mate.

how about interior lights ? and backup lights are they working ? sometimes they are all on same fuse or relay

take a look at this
www.wikihow.com/Fix-dashboard-lights-that-won%27t-Light
http://www.wikihow.com/Fix-dashboard-lights-that-work%27t-Light

http://www.wikihow.com/fix-dashboard-lights-that-work%27t-Light

When the dashboard lights in your vehicle malfunction or cease to operate, the resulting effects can range from being a mere annoyance to posing a safety hazard. Locating the problem and finding a remedy is essential. To fix dashboard lights that won't light, follow these suggestions

Evaluate the problem methodically. Begin the process by trying the simplest of solutions first. Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column, make sure its in the correct position to have the lights on.

Check the dashboard light fuse. A blown fuse can disable the vehicle's dashboard light. The fuse box may be under the hood, or on the floor, near the brake pedal, or there may be 2 fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary.

If all of the above don't fix it, then replace your light switch.

If your dashboard lights are not lighting up, chances are the fuse has blown up. And you may need to change it. Typically, the fuses are located under the dash, in the glove compartment, or under the hood.
Your NP200's fuse box that has the fuse for dashboard lights is located under the dashboard on the driver's side. Use a flashlight to locate it. Once found, remove the cover and use the provided map on the cover to find the dashboard light fuse. For more help, please refer to the user manual that came with the car.

Lights? more than one? It is extremely improbable that many lights burned at the same time. Jiggle the dashboard dimmer wheel (used for light attenuation adjustment) to see if the lights come back to life. Dimmers, being rheostats, have the nasty habit of burning spots, so they work only at a different location than the burnt spot. Many burnt dashboard lights might be an indication that they got too much voltage. ( Bad voltage regulator). Dashboard lights are placed in the rear of the assembly, and screw right into it. Dashboard must be taken out, and it isnt simple. Purchase a full set of dashboard lights at the car dealer before taking down the dashboard, because you dont want to find out that you dont have the proper bulbs, and the whole dashboard already disassembled.

Just rotate the small knob at the left of your dashboard to the right. This will increase the lights of the dashboard.