- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Alex,here's a Autozone repair guide link showing you your belt diagram. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Look's like both belts are using the crankshaft pulley,The alternator,the water pump and the crankshaft pulley is using one belt.Need more help,let me know.
Some tints have metal in them so it might cause you grief but how is the radio when you wind down the windows ?
A power aerial might fix the problem put in the front fender and then run to the radio via a coaxial cable.
However in my car it was the radio that was the cause of the same bad reception and it worked on one channel only.
I have since replaced the radio but this may not be the cause of your problem and you would want to really know if the radio was the cause before incurring an expense of a new car radio.
not sure about this one but their isnt a hole to release the barrel ,also dont think the parts are sold seperatly,you will have to renew the whole steering lock assembly complete and cut the old one off with a mini grinder ,dont forget to remove the coil mechanism around the lock ,its the aerial for the chipped key and dont forget to take the chip out of the key and put it in the new key .or just tape the key behind the plastic covers aroiund the aerial so car will start .
it all depends on if the wire does or doesnt have power when u shut the key off, if it does the pump will run non stop even with the key out,i would suggest getting the relay working properly,also depending how u hook it up u dont want too much voltage runnin through the relay...u could melt it,hope this helps
Len- The replacement only costs about $20. The dealer can also provide a replacement but it can cost upwards of $50+. Part number is 5035944.
The hardest part is removing the metal sleeve from the mast pole. Once you get this out, refit the new mast with the teeth so the motor will pull the new mast down when you turn the radio off. refit the 17mm nut on top of the mast and then turn the radio back on. It will click a few times and then be properly set.