First look at belt if loose worn cracked glazed or just plain old and worn out change because a bad belt makes noise when slipping on pulleys ------if belt is good than look at belt tensioner ---- and pulleys to all components ---and listen to the area when vehicle running for grinding or squeal
SOURCE: i need the correct firing order for a 1993 lexus ls400
if it is 4 cylender it would be 1-3-4-2 hope this helps!. john
SOURCE: dash lights all flashed on then engine died on
It sounds like your battery is dead. Try recharging your battery:)
SOURCE: lexus 93 ls400 trying to find the amp
if you talk about radio amplifier, this located in trunk, upper side left on back rear seat its an allum. box
SOURCE: Replace/fix starter on 1991 Lexus LS400
Not too bad. Not much room, just enough to drop the starter. It is probably easier to go up through exhaust if you can get your exhaust shield off the manifold .
SOURCE: belt diagram for a 1990 lexus ls400
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1990/make/lexus/model/ls_400/1990_lexus_ls_400_drive_belt_routing_diagram.htm
139 views
Usually answered in minutes!
×