Http://www.autozmagz.com/search/1992+cadillac+seville+sts+v8+4+9+liter+fuse+and+relay+diagram
see link above for assistance
SOURCE: Trunk lid closer will not work, fuse is good.
prbably looking at replacing the motor and gear assembly, gm had lots of problems due to slamming of the lid too hard
SOURCE: I have a 1992 cadillac
No im in NC wish i was tho i have tried every thing new power mods and new fan blower still keeps running,,,,,
SOURCE: HOW TO DISCONNECT FACTORY ALARM IN A 96 SEVILLE CADILLAC?
get a gun & shoot it .they were a piece of **** when put in. or find someone to install a new alarm.
SOURCE: replace power steering pump and lines 1992 cadillac seville sts
you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck
SOURCE: How do I R&R front motor mounts on 2000 cadillac sts
Very easy, just remove front tires and unbolt, BUT I doubt you are asking right question. Not mounts, but mount in dead front center is problem. There are 4 mounts, transmission center back, left center and right center and front center. That takes full torque of motor and heat from exhaust. GM has a shield for exhaust.
339 views
Usually answered in minutes!
×