Question about 2009 Lexus IS 250

Open Question

Where can i get a second used or a scrab yard for bumper and chassis hanger for lexus is 250, 2009 model in pretoria or gauteng.

I need a scrab yard or where i can get a good second hand front parts of lexus is 250 2009 model

Posted by Michael on


2 Related Answers


  • 7 Answers

SOURCE: horn doesnt work after replacing under bumper

check and see if ground wire was removed during front bumper re-installation

Posted on Jul 27, 2010


john nail

  • 1702 Answers

SOURCE: i need a used headlight

try Al,s foreign1-314-382-5404 it is a salvage yard in St. louis MO they will ship anywhere also try Brickyard Imports 1-800-248-9273 it is also a salvage yard that ships anywhere they are in Indianapolis IN.......for a new on try Thompson's Collision parts 1-800-252-5716

Posted on Feb 13, 2011


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you have to remove bumper on 2005 sc430 lexus to adjust the driver side back up light? The right side is flush with bumper however the left side is in about 1/2 inch.

There's this website
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!

Mar 15, 2018 | 2005 Lexus SC430

1 Answer

How do I go about installing a Warn winch on the metal bumper and chassis of a 1996 3.0l v6 Mitsubishi Pajero without modifications? Cables are standard Warn designed for this winch.

just make sure you get the right steel plate for your bumper to hold the winch on or it will rip your bumper off the first time you use it make sure it is bolted sucure

Jan 19, 2015 | Mitsubishi Cars & Trucks

1 Answer

Daihatsu charade

If there is a wrecker in the town then check there . It is unlikely that you will get matching colours so be prepare d for a paint job on the panels . IF not check nearby wreckers or import the panels from a wreckers in japan.

Mar 23, 2014 | 2005 Daihatsu Charade 1.0

1 Answer

2006 gs300 rear rattles

Bet the "mechanic" didn't check the exhaust system hangers.

Jul 25, 2017 | 2003 Lexus Gs 300

1 Answer

How to change a 1999 Audi a6 alternator

Changing the alternator itself is the easiest of tasks on the A6. It's getting to it that is a problem.
Here is how.
Disconnect the headlight connections the remove the headlamps.
Disconnect the water hoses between engine and radiator.
Remove transmission cooler pipes from radiator. (You have to plug these somehow to prevent loss of ATF and dirt contamination)
Remove spot light covers from bumper. Look under there and you will see 2 alled bolts fixing the bumper to the chassis. Undo these.
Next remove the bumper bolts on the fenders whichn yo can only reach through the headlight holes.
Ease out the grille and disconnect any wiring that could be strained especially the one on the radiator lower hose.
Pull the right side of tf the bumper out more to see the alternator. You do not have to remove air con pipes, just un-hook any hangers.
You need a 17mm socket and power bar to remove the serpentine belt then you undo the 2 bolts attaching alternator to motor and the 2 elecric cables to the alternator.

Jan 29, 2013 | 1999 Audi A6

1 Answer

How can i open my gas tank if my gas lever release 1993 lexus fell off

In a pinch use a coat hanger. Open the coat hanger so that it is one long piece of metal and cover one end with black tape to protect your paint. place it so that it hooks the tank cover. Push the button to open the tank cover while gently pulling on the coat hanger. Voila

Jun 23, 2012 | 1993 Lexus Es 300

1 Answer


i always use a old betal coat hanger for difficult to clean out jobs but look under truck by firewall and you should see it hanging down on teh passenger side ,the coat hanger is for the ones that empty into the chassis under neath

Mar 26, 2011 | 2007 Mitsubishi Raider LS

1 Answer

I live in Pretoria, i'm looking for the rear shocks and the rear left hand side bumper. where can i buy this spares?

Shocks you can get at any spares place, watch places like Supaquick and Speedy's, they have specials from time to time, two for the price of one type of thing. Midas and Autozone also do specials and advertise in their pamphlets. Sonny's in Actonville, Benoni are also pretty cheap. There are are places all over Gauteng that repair bumpers, try them or use the yellow pages and phone around the scrap yards. Last resort unfortunately is the agents but that will probably cost you lots of Rands.

Jan 25, 2011 | 2006 Fiat Strada

1 Answer

Horn doesnt work after replacing under bumper

check and see if ground wire was removed during front bumper re-installation

Jul 27, 2010 | 1994 Lexus Es 300

1 Answer

Rubber exhaust hangers for the roadmaster wagon

Carefully remove the hangers, take/use an old rubber tire or this quality/texture of rubber & cut new ones for the hangers OR go to a Wrecking yard and remove and purchase what you need...

Jul 14, 2010 | 1996 Buick Roadmaster

Not finding what you are looking for?
2009 Lexus IS 250 Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides