My factory radio stoped working in my 2004 Nissan maxima all the lights come on I can Chang station but no sound it will eject a CD if I put one in but no sound

SOURCE: '06 Nissan Murano factory radio/cd player removal steps

what holds the radio in place besides the 2 side screws in a 2006 nissan murano

SOURCE: 2005 Nissan Maxima SE Fog light replacement

jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......

SOURCE: Delco factory Radio/CD player,it gives an err msg.and ejects CD

The laser in the cd player may be dirty or has gone bad and can no longer read the disc.

SOURCE: 2004 NISSAN SENTRA . THE VOLUME OF THE RADIO

same this happned to me in my 2006 sentra. the volume for the radio is gone. i can tune, its just barely audible/ quiet. weirdly though it sounds perfect when playing CDs. i almost thought maybe it got switched in to mute mode or something. did you figure out your problem?

SOURCE: reset code for 2006 nissan maxima radio...

just changed battery,,all good,,radio is out,,tried fuses ,, what can i do to get the radio back on...