Timing marks for polo vivo 1.4 2010

SOURCE: i have a 2002 vw

hi mark,to answer your question,if you look at the very front of the engine you will see some pulleys for the waterpump/pwr steering/alt.just behind you will see a 1.1/2 plastic cover that hides the BELT.(engine designed by Hyundai in collaberation with VW for the far eastern market(China)same block also used for 3cyl diesel.
regards,geoff.

SOURCE: i've jst changed my timing chain, but when i

This sounds like a timing issue, recheck the cam and distributor timing. Look for intake leaks...

Marvin

• 85242 Answers
• Posted on Jul 27, 2012

SOURCE: where will i find the ecm relay on a vw polo vivo

It should be located in the under hood fuse and relay center.

SOURCE: 2008 VW polo 1.4 timing marks on pulleys to replace cambelt

must be on right timing in all pulleys and gears on mark then remove it

SOURCE: I bought the tools to adjust timing. Changed the oil control valve. Changed the actuator. Changed the the timing chain and chain tensioner. Now there is no compression. I don't know if the valves are

Sounds like the cam is 180 degrees out of time.