Question about 1989 Ford Crown Victoria
Usually the problem is inside the lock switch. You should have power at the EEC relay and the coil with the switch in the on position.
Posted on Jun 16, 2015
SOURCE: 97 Crown Vic transmission issue
Check the transmission linkage cable that runs from the steering column under the dash to the trans under the car. make sure that the cable is not damaged and that all connections are tight.
Posted on Jan 07, 2010
If you have more than 100,000 miles use high mileage oil. In the spring and summer use 10w30 and if it gets bellow -20 where you live use 5w30 in the winter
Posted on Oct 20, 2010
All 2000 and up vehicles utilize a Solenoid which is powered by depressing the Brake Pedal to allow the Shift Lever to be move from Park to any other position. Is the Shift Lever located on the Steering Column or the Floor? In either case typically the Solenoids used by Ford do occasionally go bad. I highly recommend having a certified technician replace the solenoid.
Posted on Nov 18, 2011
Tips for a great answer:
Dec 14, 2017 | 2003 Ford Crown Victoria
Jul 21, 2014 | 1994 Ford Crown Victoria
Jun 06, 2012 | 1995 Ford Crown Victoria
May 07, 2012 | 1999 Ford Crown Victoria
Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan
Oct 26, 2009 | 1989 Ford Crown Victoria
Nov 24, 2008 | 2000 Ford Crown Victoria
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: