Most ignition switches are in the same barrel as the locking mechanism so you would need to remove the ignition off the steering column in order to release the lock.usually gain access by removing cowling that surrounds internal steering column.bear in mind some locks on certain models need to remain in situ as they have micro switch to immobilize ignition once off the column.if you replace lock make sure you get the keys that go with it.even then you may have to get auto locksmith to program ecu to accept new lock and code.
SOURCE: A4 steering lock does not engage and car won't turn over
The steering locks don't necessarily engage when the key is removed, I always turn the wheel before exiting to engage it. There are several positions that will allow the pin to lock in but if between these, it may seem that it isn't locked.
SOURCE: cannot unlock the steering wheel on oldsmobile intrigue 2001
is it the right key for that car? cause if not then that is the problem... if it is the right key, then you might have to replace the key cylinder cause you may have something broken in it...
SOURCE: ignition key won t turn. steering wheel locked
the key may be worn badly or the ignition needs to be replaced.
SOURCE: steering wheel is locked nd wont unlock even with
Typically, the steering is preloaded. This happens when car is turned off with some steering assist being applied (whether you know it or not).
Often you have to manhandle the wheel in one direction or the other while turning the key.
172 views
Usually answered in minutes!
×