Question about 1997 Hyundai Elantra
See exploded view
1. Drain the coolant down to thermostat level or below. 2. Remove the coolant outlet fitting and gasket. 3. Remove the thermostat
Posted on Jun 23, 2008
If it is the light in the rear window, there are two plastic caps on either side on the base of the light. Pop off the cap and remove the screws inside. That should allow you to get to the bulb. I went to autozone for the bulb w/o removing it and they gave me the wrong one. If you have the bulb removed, you're better off, if not, the people at advanced got me the correct one without any issues. If it's the brake lights on the back of the trunk, you access those from inside the trunk. On either side, there are thumbscrews (sometimes under the fabric lining flaps). Once you remove the bulb carrier, you'll know which one is out. It usually lines up with the red cover but if you can borrow someone's time, have them look in your trunk at the bulbs as you test your parking lights to see which one lights and which one doesn't. Hope this helps.
Posted on Dec 26, 2008
SOURCE: bulbs keep burning out
When you replace headlights in today's cars, DO NOT TOUCH THE GLASS OF THE BULB!. Handle the bulb only with the packing material the bulb ships in, or with a clean dry cloth.The oils in your skin will cause premature failure of the bulb.
Also, check the sockets (car side) carefully to make sure they are not burned.
Posted on Feb 03, 2009
yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx
Posted on Mar 16, 2009
Tips for a great answer:
Apr 11, 2015 | 1997 Hyundai Elantra
Jul 30, 2014 | 1997 Hyundai Elantra
Sep 12, 2013 | Hyundai Motor 2003 Elantra
Oct 01, 2011 | 2001 Hyundai Elantra
Mar 25, 2011 | 2000 Hyundai Elantra
Apr 27, 2010 | 2006 Hyundai Sonata
Mar 16, 2010 | Hyundai Motor 2002 Elantra
Sep 10, 2009 | 2001 Hyundai Elantra
Jul 09, 2009 | 2006 Hyundai Elantra
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: