Code error p0970 honda - 2005 Acura RL

Question edited for clarity.
Question moved from Televisions Category.

https://www.google.com/search?q=2004+Honda+Civic+LX.+Error+Code+119-1

..

see a relative link
http://www.hondacarforum.com/honda-3/22348-2000-honda-civic-radio-error-code-problem.html

GCU internal failure or inverterunit internal failure.

https://www.manualslib.com/manual/2167496/Honda-Eu65is.html?page=58#manual

Contact your local Honda dealer.

this code is to remind you that the coolant should be changed inline with honda service schedule , make sure you get honda recommended coolant as other's may cause corrosion to the coolant channels , radiator etc

Hondas website has an area for honda owners that offers services like resetting the code. check it out. if that doesn't help, let me know. good luck.

go to youtube.com and input clearing maintenance code for 2004 honda crv. the video will show you how to do it in three minutes.

Diagnostic Test Code (DTC) P0970 is defined by SAE J2012 as "Pressure Control Solenoid "C" Control Circuit Low".

Please note that this is a TRANSMISSION fault code. The Powertrain Control Module (PCM) is basically telling you that the return voltage (on the control circuit) from the pressure control "C" solenoid is much lower than it should be.

This could be due to a problem in the voltage SUPPLY circuit to the solenoid, the solenoid itself (open windings) or the control (ground) circuit back to the PCM. It can also be caused by a faulty PCM. However, this is VERY unlikely.

Troubleshooting this circuit is pretty simple.

Test for battery voltage at the solenoid connector. If it is present, go to the next step. If it is not, repair the voltage supply circuit.

Check continuity between the solenoid connector and the PCM. If continuity is good (less than 1 Ohm resistance), replace the solenoid. If there is no continuity or if resistance is over 1 Ohm, repair the control circuit between the solenoid connector and the PCM.

You can also check resistance of the solenoid itself to determine if the solenoid is bad. I recommend doing this before replacing the solenoid anyway, because this code may have been caused by a bad connection at the control solenoid (sometimes simply unplugging the connector and plugging it back in can fix the problem). The specification for the solenoid itself is 3 to 10 Ohms.

----- Error code radio Honda Civic 2007 -----
power on radio, when you see Error code 1 or 2 or 3 ..., power off the radio, press the keys 6 and 1 at the same time, and power on, you'll see the radio serial number, write down this S/N and call your dealer, give him this S/N, he will give you the code (5 numbers), that's it that's all
:')
Lahoucine Dahir

Fix Error Code 39 - 2 Minute Error Code 39 Fix. Free Download. 100% Guaranteed.
Free.PC-Error-Repair.org