At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are three fuse's for alternator ! One in the under hood fuse box, F126 30amp, one in the central junction box F227 10amp an there is a 175 amp fuse or fusible link installed in the heavy gage wire from battery to the back of the alternator . Rather then tearing the vehicle apart looking for fuse's , take a volt meter an check the wires at the alternator an see if your missing voltage at any wires . Does the charge light or battery symbol light come on when you turn the key on ? If so you have eliminated one of the fuse .
Sounds like a battery cable problem. Check the battery cable terminals for corrosion and tightness. If those are fine, have a load test done on the battery. Here is some troubleshooting tips:
Battery terminal connections loose of corroded. Check the cable terminals at the battery; tighten cable clamp and/or clean off corrosion as necessary. Battery discharged or faulty. It the cable ends are clean and tight on the battery posts, turn the key to the On position and switch on the headlights or windshield wipers. If they won't run, the battery is discharge. Automatic transmission not engaged In park (PI or Neutral (N). Broken, loose or disconnected wires In the staging circuit. Inspect all wires and connectors at the battery, starter solenoid and ignition switch (on steering column). Starter motor pinion jammed in flywheel ring gear. II manual transmission, place transmission In gear and rack the vehicle to manually turn the engine. Remove starter and Inspect pinion and flywheel. Starter solenoid faulty. Starter motor faulty. Ignition switch tautly. Engine seized. Try lo turn to crankshaft with a large socket and breaker bar on the pulley bolt. credit: https://www.wc-autoparts.com/blog/trouble-shooting-no-start-condition-19932002-camaro-and-firebird/
When trying to turn my truck on only clicking noise under hood and in dash. Sometimes even after key is pulled out clicking noise in dash continues for a couple of seconds. Battery and alternator was check at Advanced Auto parts they say both are good
×